Pig manure dehydration equipment is technologically advanced

TCJ-1：

1200*600*1800

TCJ-2：

1600*600*2000

Equipment introduction:
The pig manure dehydrator is a new type of mechanical dehydration equipment developed by Tiancheng Environmental Protection Company based on various advanced dehydration equipment at home and abroad, combined with its own experience in the research and development and manufacturing of dehydration equipment. It is already on the market. Recognized by the majority of users, the spiral dehydrator mainly consists of a control cabinet, pipes, machine body, mesh screen, extrusion auger, vibration motor, reduction motor, counterweight, unloading device and other parts. This device has a wide range of applications.
Working Principle
The working process of the pig manure dehydrator is as follows: the non-clogging pump pumps the material into the body, and the material is accelerated under the action of the vibration motor. At this time, through the power transmission, the extrusion auger gradually pushes the material Push it to the front of the machine body, and push the dehydrated material forward at a speed of rpm through the extrusion screw placed in the screen. At the same time, the pressure on the front edge is continuously increased, forcing the moisture in the material to filter while pressing. Squeeze out the mesh sieve and out the drain. The work of the extruder is continuous. The material is continuously pumped into the body. The pressure on the front edge continues to increase. When it reaches a certain level, the discharge port is opened and the extrusion port is squeezed out to achieve extrusion discharge. the goal of. In order to control the discharging speed and moisture content, the counterweight block under the main machine can be adjusted to achieve a satisfactory and appropriate discharging state.
3 Equipment Features
The pig manure dehydrator has the characteristics of small size, low rotation speed, simple operation, convenient installation and maintenance, low cost, high efficiency, fast investment recovery, and no need to add any flocculant.
It has high automation level, easy maintenance, large daily processing capacity, small footprint, fully enclosed, environmentally friendly and hygienic, low power consumption, and can be suitable for continuous operation. Its key components are made of stainless steel. The whole machine weighs nearly half a ton and has a small overall size.
It has excellent dehydration effect on pulp from paper mills and distiller's grain materials from wineries, and the moisture content of the discharged materials is low.
It can separate raw livestock manure water into liquid organic fertilizer and solid organic fertilizer. Liquid organic fertilizers can be directly used for crop utilization and absorption, while solid organic fertilizers can be transported to fertilizer-deficient areas for use and can also improve soil structure. At the same time, they can be made into organic compound fertilizers through fermentation.