TXP ceramic cyclone dust collector is environmentally friendly, energy-saving and high temperature resistant

Ceramic cyclone dust collector is environmentally friendly, energy-saving and high temperature resistant 1. Overview
The Huaying type dust collector is a new type of cyclone dust collector designed and developed on the basis of various original cyclone dust collectors. It adopts Stayman's highest optimization coefficient structural type. The inner and outer casings and components are built with ceramic cylinder blocks to ensure anti-wear performance. Not only is the service life guaranteed, but the amount of steel used is reduced, and the cost of the device and maintenance and repair costs are reduced. Solved the problem of cyclone dust collector wear. [
Zhang Yan]
2. Dust removal mechanism
This dust collector takes advantage of the effect of the peak velocity field distribution in the cyclone cylinder on the rise of flue gas, and is equipped with a rising cylinder and a secondary separation chamber. Center exhaust pipe. The flue gas swirls into the cylinder from the inlet at the designed speed. The smoke and dust are separated by centrifugal action. The dust separated from top to bottom settles along the cylinder to the ash trough. The flue gas rises along the left and right cylinder diameter at the peak speed of the swirl flow, containing Part of the flue gas with a higher concentration of fine dust flows into the secondary separation chamber at high speed along the rising cylinder wall, and then returns to the cone through the bypass air duct. The secondary separated dust falls to the bottom of the cone and merges with the primary separated dust. Ash trough. The secondary separated flue gas is discharged from the outlet through the middle exhaust pipe. Since the rising swirl speed in the rising cylinder is much higher than that in the main cylinder, the fine dust can be effectively separated for the second time. The overall dust removal efficiency is greatly improved.
By designing the cyclone separator, particles of various sizes in dusty gas can be effectively removed. Here are some practical examples. The main reason that prevents the use of cyclones to capture fine particles is economic considerations. When a small-diameter cyclone separator is used to capture such small powder, the separation efficiency can reach a high level. However, for many industrial areas, using such a small cyclone separator is not an economical option. Cyclone separators are now adapted to the environment and process and can separate powders that are finer than the accepted particle size. It is precisely because of the progress made in cyclone separator design at the end of the century that cyclone separators have been widely used for emission control and product recovery of powders with average particle sizes below.
Botou Huaying Environmental Protection Equipment Co., Ltd. specializes in the production of various dust removal equipment and dust removal accessories. manufacturers are welcome to discuss cooperation and learn more about product information
Please call: Zhang Yan
: