Profile grinder parameters Electric grinder specifications DM2.2 rail grinder

Hot selling Jiangxi profile grinder [Grinder] Electric square rail grinder Electric rail grinder price Profile grinder parameters Electric grinder specifications
[Electric profile grinder] Usage:
Type electric rail The grinder is suitable for grinding 3 rail welds, uneven joints, rail side fat edges, rail surface welding repairs and other parts. With the advantages of high operating efficiency, good grinding quality, easy operation, and convenient access to and from the track, the electric rail grinder is an essential tool for railway engineering overhaul, repair and emergency repair.
[Electric profiling grinder] Parameters:
Model:
Power: three-phase asynchronous. Electric motor
Speed:
Cup-shaped grinding wheel:
Bolt tight Solid flat grinding wheel:
Number of spindle revolutions:
Roller span:
Bare metal weight:
Packing box weight:
Bare metal size: Ⅹ3Ⅹ
Packing size: Ⅹ3Ⅹ
[Electric profiling grinder] Operation method:
Place the grinder on the rail and move it through two profiling rollers. The hanging wheels must be in contact with the rails on both sides and rotate freely.
When turning the handwheel clockwise, the cup-shaped grinding wheel moves downward.
To obtain good polishing quality, two steps must be followed.
) Rough grinding: The grinder moves along the rail, gradually lowers the grinding wheel, and grinds to the off-rail surface. Grinding should start from the rail surface and then hit the side. When grinding the other side of the rail, the grinder must be turned around.
b) Fine grinding: Based on the rough grinding, the grinder is repositioned to prepare for grinding the rail surface. When the reference roller is in place, lower the grinding wheel so that it just touches the rail surface that does not need to be polished near the weld. Start grinding from the rail surface, and then grind the sides. The grinding range should reach both sides of the weld. In order to compensate for the wear of the grinding wheel, it should be Lower the grinding wheel slightly.
After the grinding is completed, the handwheel must be rotated counterclockwise to lift the grinding wheel to facilitate grinding of the next weld.
The rolling bearing combination of the grinding machine spindle and the rolling bearing combination of the roller must be injected and replaced with grease regularly. The spiral pair of the feed motion and its support must be injected with grease regularly.
All employees of Shandong Yushun Industrial and Mining Equipment Co., Ltd. adhere to the principles that credibility is life, quality is survival, and customers are the parents of food and clothing, and strive to make new contributions to new and old customers at home and abroad.
Contact: Manager Guo
Mobile:
Landline:
Fax:
:
Email:@