Various types of central dust removal equipment

Features and safety of central dust removal in woodworking workshops? Since woodworking dust is flammable and explosive dust, the dust collector produced by our company is equipped with reliable anti-static devices, explosion-discharging devices, and strong pulse anti-clogging devices to ensure long-term safe operation of the equipment. ? Energy saving? Since the dust collector adopts downdraft design, negative pressure working system, high-configuration pulse self-purifying injection system and high-quality filter material, the operating resistance of the equipment is reduced by more than that of the traditional one, and the operating cost is reduced by more than that of the traditional one. If an up-frequency conversion device is installed , the power saving effect is more ideal. ? Adopt mature frequency conversion technology (optional) ? The designed total air volume is the processing air volume under full load, but in fact, woodworking equipment does not work at the same time for a long time. If the fan is still running at full air volume at this time, it is inevitable There is a phenomenon of "big horse and small cart". If some power-saving measures are not adopted at this time, power will be wasted and operating costs will be very high. After adopting mature frequency conversion technology, the air volume "supply" of the fan and the actual "demand" of the air volume at the vacuum nozzle are automatically adjusted through the frequency conversion technology to match the "supply" and "demand", thereby avoiding the "big horse" problem. The "car" phenomenon saves electricity and operating costs. At the same time, our company has recently launched an automatic switching air duct valve (automatic pipe valve) device that is matched with energy saving. An automatic pipe valve is installed at the corresponding exhaust pipe valve of each piece of equipment. When the equipment stops working, the valve will automatically close immediately, the equipment will not draw air immediately, the fan will automatically slow down, and the power consumption will naturally decrease, thereby avoiding the phenomenon of leakage due to manual operation. ? A series of anti-clogging devices? In view of the problem that large and long materials in the wood and furniture processing industries can easily block the air duct or dust collector, convenient maintenance measures are provided in the sedimentation chamber and pipes in front of the bag dust collector to intercept large and long materials. Ensure long-term stable operation of the system. ? The wood chaff adopts centralized pneumatic ash conveying mode, so there is no secondary flying of dust. ? The equipment occupies a small area and is beautifully arranged. ? .. Design principles? ⑴ According to the causes of dust generation, the specific conditions of the workshop site and equipment layout, use plastic vacuum hoses to connect the production equipment, so that the vacuum hose does not affect the operation of the production equipment, and can remove dust containing sawdust. The air is sucked into the dust removal system and then discharged after treatment and purification. ? ⑵ Use advanced dust removal technology and equipment to ensure long-term stable operation of the dust removal system, and the exhaust gas meets the requirements of relevant national and local standards, reduce project investment and equipment operation costs as much as possible, and make the equipment easy to repair and maintain. ? ⑶ When the dust removal system is running, it can control the dust from overflowing to the maximum extent, reduce the pollution of the factory, and greatly improve the ambient air. ? ⑷ Ensure that production is not affected during construction and installation. ? Applicable places: ? Applicable places Suitable objects are dusty in the air? Furniture, flooring, laminated lumber sawdust, waste shavings, wood powder mixture/3? Surface sanding of various artificial boards fine wood chips, such as sawdust, sand Light wood powder