Wuwei DQ-1 epoxy resin bearing mortar manufacturer price

包装：

牛皮纸袋包装

用量：

2.1-2.2吨/立方米

规格：

50kg/袋

Sales hotline: (Mr. Li) Bearing mortar is a special cement mortar, which is composed of a variety of inorganic and organic materials. This product is a high-quality cement-based composite material used for the installation of railway bridge bearings. Due to its use A variety of high-performance additives make the surface particularly smooth and flat after completion, overcoming the shortcomings of traditional mortar such as unevenness, cracking, and peeling. It has the characteristics of self-leveling, high early strength, high strength, no shrinkage, high wear resistance, and convenient construction. It is suitable for emergency repairs, support anchoring, secondary grouting of anchor bolts and bases of large equipment and precision equipment, secondary grouting of steel structures and concrete consolidation, secondary reinforcement of beams and columns, etc. It is especially suitable for high-speed railways and passenger transportation. The performance indicators of the bearing grouting for dedicated line and highway bridges meet the technical requirements of the "Interim Technical Conditions for Basin Rubber Bearings of Passenger Dedicated Line Bridges" and the "Interim Technical Conditions for Cylindrical Steel Bearings of Passenger Dedicated Line Bridges" issued by the Science and Technology Base.
1. Usage and storage: Base surface treatment: The base surface to be grouted should be cleaned of dust, oil, other dirt and other substances that are not conducive to bonding. The base surface should be pre-wetted an hour in advance. No clear marks should be left during construction. water.
Use gravity grouting to fill the gaps at the bottom of the support and the anchor holes. The grouting process should be from the center of the support to the surroundings until the grouting material is completely filled from the gap between the formwork and the bottom plate of the support. The amount of mixing each time should depend on the usage, and the material should be used up within 3 minutes.
, packed with plastic bags lined inside and composite bags outside. Each bag has a net weight of kilograms and is valid for three months. It can still be used after passing the validity period and passing the inspection.
2. Main technologies and indicators:
, bleeding rate/
, fluidity
Initial fluidity
3 fluidity
Compressive strength
/> and no shrinkage
, flexural strength

, elastic modulus

, expansion rate

3. Material dosage: The water-to-material ratio is .3, as provided by the manufacturer, and the material dosage per unit is
4. The company's main products are divided into:
Building grouting reinforcement series: high-strength non-shrinkage grouting material, epoxy resin grouting Materials, tunnel pressure slurry (agent), bearing mortar, road spike anchoring agent, track cement, high-strength wear-resistant material, wear-resistant floor hardener.
, Repair mortar series: epoxy repair mortar, epoxy resin cement, epoxy resin mortar, polymer repair mortar, polymer repair and reinforcement mortar.
Epoxy structural adhesive series: modified epoxy reinforcement adhesive, modified epoxy steel adhesive, modified epoxy carbon fiber cloth adhesive, modified epoxy grouting adhesive, micro crack sealing paste, seam sealing adhesive , Stone dry hanging glue.
, ceramic tile pasting and interface treatment series: ceramic tile adhesive, vitrified tile adhesive, marble adhesive, mosaic adhesive, color anti-mildew caulking agent, 3 concrete re-pouring agent, dry powder interface agent, steel anchoring agent, construction rubber powder.