Supply original Yuyan V23 series axial variable piston pump

Series axial variable piston pump
Supply original Yuyan series axial variable piston pump




Character and character
Work release cylinder The shape of the connection flange screw hole distribution circle
(





Before installation, check that the tie rod should not be rusted or deformed.
Coat the sealing ring with anti-corrosion oil when installing.
Adjustment of the pressure relief valve
After the pressure valve is installed, check that there should be no air leakage in the pipes at the flange connection of the cylinder piston.
The pressure valve cylinder and protective cover should be concentric. There should be no burrs, flash, dirt, etc. in the inner hole of the protective cover to avoid affecting the normal operation of the pressure relief valve.
The six long exhaust holes on the protective cover should not be in the old Block to keep the flow area larger than twice the piston area
Application and
During normal operation, the air compressor system pressure should not exceed /)
Frequently check the hardness valve, cylinder piston flange connection and If there is no air leakage in the pipeline, the fastening parts should not be loose.
Dedicated personnel should be assigned to perform regular inspection and maintenance. When the pressure relief valve is working normally, check it at least once a month. Check the extension and corrosion of the tie rod. Check the elasticity and sealing condition of the sealing ring. In principle, the tie rod should be replaced every six months in case of special circumstances such as severe corrosion or obvious thinning due to pressure relief. It should be replaced in time.