FX2N-4DA Shenzhen PLC manufacturer

Product Detailed Description The analog special module has four output channels. The output channel receives the digital signal and converts it into an equivalent analog signal, this is called /conversion. Maximum resolution is bits.
Voltage and current selection based on input/output is completed through user wiring. The available analog value range is - to (resolution:), and/or to (resolution:), which can be selected separately for each channel .
Data is exchanged with the main unit through buffer memories. There are 3 buffer memories (each bit).
Occupy points of the expansion bus. This point can be assigned as input or output. Draws current from power bay 3 of the main unit or active expansion unit.
Performance indicators
Items
Voltage output
Current output
The selection of voltage or current input is based on your selection of input terminals, and input points can be used at the same time.
<> Analog output range
<> to (external load impedance:).
<> To (External Load Impedance:)
<> Digital Input
Bit, Binary, Signed (Numeric Valid Bit: bit and a sign bit (bit))
< > Resolution
<> ( /)
<> ( /)
<> Overall Accuracy
<> Soil (for range - to)
<> ( For a range of - to)
<> Conversion speed
channels. (Changing the number of channels used does not change the conversion speed)
<> Isolation
Between analog and digital circuits Isolated with optocoupler. Converters are used to isolate the power supply from the main unit. There is no isolation between analog channels.
<> External power supply

<> Number of occupied/points
Occupied expansion bus points/(both input and output)
<> Power consumption
, 3 (internal power supply or active expansion unit)