Searchlight handles the SASO test and gets the preferential certificate report quickly

Hello! I'm glad you can see this message. My name is Mr. Cheng from Nordic Testing Technology Service Co., Ltd.
. /< WeChat:
. < The following is a brief introduction about < r< certification. Welcome to watch. read!
. For detailed certification information on your product, please contact me.
.
.
. < Certification
. Since Saudi Arabia has no mandatory electrical compatibility testing requirements since < r< years, when testing live products , you don’t need to consider electromagnetic compatibility, you only need to do the safety part of the test, that is, the < < test part of the < r< certification is enough (of course, if the Saudi guests have this requirement, there is no way , can only be done according to the customer's requirements.)
.
. If your product has undergone other certifications, such as < r< < r< < r<, etc., as long as the test items can meet the requirements According to Saudi Arabia's safety requirements, the power frequency is also < r<. Then, the test report for this certification can be accepted without writing a difference report. However, the date of the report cannot exceed < r3< years. If the customer's product has been < r< certified, then the < r< certified < < test report < < test report depends on the testing agency, because < r< certification is currently relatively poor, and not all agencies' reports are the same. To be acceptable, the < r< certified test report must be issued by a < r< qualified institution. When submitting the application, it is best to attach the < r< qualification certificate of the institution.
.
. If the customer's product has been < r< certified, his report can be accepted, but not completely, because China's power frequency is < r< and Saudi Arabia's is < r< but not If it is accepted, a power frequency test must be done. After the frequency test is done, the report can be accepted. In addition, if your product is not electrified, such as some simple auto parts or daily necessities, such as simple metal shelves (hardware products), then you can consider using the factory internal test report. If it is an auto parts product, you must use the < r < system Certificate < r+< Factory internal test report is acceptable. Otherwise it is unacceptable! After having the above test report, it is time to proceed to the next step:
.