FX2N-1PG plc control unit, plc jog control

Product Detailed Description - The pulse generator unit can accomplish simple positioning of an independent axis (interpolation control between multiple axes is not shown) by supplying a specified number of pulses (maximum) to the drive amplifier of a servo or stepper motor. realized.
- is configured as an extension of the series. Each functions as a special clock, using the R/ instruction, and takes points as output or input for data transfer. One can be connected to achieve independent operations.
Performance Specifications
Item
Specifications
<> Drive Power Supply
<> ①+ (for input signal) Current consumption: or less, by external power supply or + output power supply
②+ (for internal control):, powered by extension cable
③ for pulse output: to current consumed: or less
occupied/points< br/> Each occupied point input or output
Number of control axes
(one can control at most independent axes)
b Command speed
b When the pulse speed is at ~ Operation is allowed
The command unit can be selected from .,/ and
<> Set pulse
<> to earth
Absolute position specification or relative movement specification can be selected
The command unit can be selected between pulse, and
The multiple can be set for positioning data, r, or
b Pulse output format
b Forward and reverse (R) pulses can be selected or Pulse with direction(). Open collector transistor output. to, or less
<> External
<> Provides optical isolation and operating instructions for each point.

Dot input: (/), and,

Dot output (/R/) to, or less.
<> Communication with
<> There is bit R (no battery backup) in the cache (B) to.
Use the R/ command to perform data communication with.
When two B's are put together, 3-bit data can be processed.

Note: When the current flows from the + terminal to the - terminal, a point signal is input.