不需要任何工具,只要轻转旋钮,便可将制图桌桌面调到最合适的高度和角度,左右同步即停即锁,极大地方便了绘图或读写保障.它有助于保护视力,减轻疲劳,预防和矫正椎柱变形,防止低头综合证,提高绘画兴趣和效率.
适合各大院校土木工程系,建筑工程系,美术系,园林艺术系等的绘图、绘画、制图、设计专业使用,并获得国外学者的青睐。
绘图桌生产工艺:
1、绘图桌钢管表面经脱脂、除油、除锈、磷化、静电喷塑、高温固化而成;
2、焊接部分采用二氧化碳气体保护焊,无焊渣,焊点美观,焊接牢固,不脱焊;
3、抽屉采用三聚氰胺贴面板材料
绘图桌技术参数:
脚柱采用1.0×25×70mm矩管,
着地横管采用1.0×25×50mm矩管,
图板边框和拉衬由1.0×20×20mm的方管组成。
升降和调角轴采用厚度为0.6mm,直径为19mm的不锈钢管。
脚套是PVC材料。
台面调角幅度:0°~80°
台面规格: 600mm×900mm(图标图板)
高 度: 62cm~80cm
武汉腾亚校具厂,十年校具产品开发经验,无数各大、中、小学校成功案例——欢迎来厂参观合作!
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【Tenya Lift Drawing Table Drawing Table Drawing Table】are provided by member【Wuhan Tengya Technology Co
】,By Titker Trade Network members 【Wuhan Tengya Technology Co
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!