Hulin sells thermal insulation air conditioning pipe pad manufacturers

Hulin sells thermal insulation air conditioning pipe skidding manufacturers - skidding is mainly suitable for laying and erecting chemical energy pipelines, and is specially installed on the support seat above the thermal or cold insulation pipe rack
-,
- -Then Clamp with
--two-bolt pipe clamp. Because the cold heat of low-temperature pipes may be transmitted to the structural beams through the support base, adding wooden blocks can effectively prevent the cold heat from being transmitted
- -, thus preventing the occurrence of cold bridges
-,
- -Heat insulation
-
- -Cold insulation
-
- - Functions to reduce vibration and buffer thermal expansion.
- -The raw material is mainly red pine wood. This product is based on the standard pipe frame diagram issued by the State Administration of Petroleum and Chemical Industry
-
- -.
- -Inner diameter of skid
-
- -,
- -,
- -,
- -,
- -,< br/>- - ,
- -,
- - ,
- -,
- - ,
- -,
- - ,
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- - and other models.
- - Thickness of skidding
-
- -,
- -,
- -,
- -,
- -,< br/>- - ,
- -,
- - ,
-
- -etc.
- -The length of the skid
-
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- -,
- -.
- -Both type one and type two can be customized and produced. Each specification of cold-insulating wood blocks and cold-insulating wood blocks can be customized according to customer requirements.
- - Note: When the thickness of the cold insulation layer is greater than
- - mm and the thickness of the thermal insulation layer is greater than
-
- - mm, the construction should be divided into two or more layers, and The thickness of each layer
- - should be similar. Accessories such as lifting lugs, skirts, instrument pipe seats, supports, hangers, and brackets on cold insulation equipment or pipelines must be cold-insulated, and the length of the cold-insulation layer shall not be less than four times the thickness of the cold-insulation layer or laid to the pad Wood place.