When buying a trowel machine, click on this quality assurance

Technical parameters:
Model:
Power: r
Blade:
pieces
Cutterhead:
meters (can be changed to

cm) or

cm
variable

trowel is dual-purpose, it can be used as a one-meter-diameter trowel, and at the same time Remove the blade screw and it can be used as a trowel.
Speed:
Weight:
Fuel consumption: r
Four-stroke air-cooled
Working efficiency: r-
Length, width and height:
Concrete trowel machine operation safety:
Before use, check whether the motor, electrical switches, cables and wiring are normal and comply with regulations, and install a leakage protector.

. Check and clean the debris on the wiper plate before use to avoid the whole machine jumping during use

. Carry out a test run after turning on the power, and turn the blades clockwise. The direction of rotation must not be reversed.

Operators should wear insulating shoes and insulating gloves. Cables should be carried by auxiliary personnel, who should also wear insulating shoes and insulating gloves. Pay attention to prevent the cable insulation layer from being broken and causing an electric shock accident.

If the troweling machine fails, it must be stopped and the power supply must be shut down before maintenance can be carried out.
A set of gasoline troweling machines includes a frame and a power unit. For the convenience of transportation, the general delivery is divided into two, one large and one small. You need to install it yourself after receiving the goods!
The installation steps of the trowel are very simple. First install the power head and place the fastening screws on the gearbox.
The second step is the belt guard and handrail. The screws have already been assembled. You just need to align the thread holes and tighten the screws! r?
Relatively simple.
If it is really impossible to install, we can ask the technical phone to guide the installation, so consumers can rest assured to buy, and there will be no inability to use it after purchase.