Jining manufacturer produces NGM-4.8 internal combustion rail grinding machine

Jining manufacturer produces internal combustion rail grinding machine, first-hand supply of grinding machine. China's railways have a history of more than a hundred years. Over the past hundred years, the means of railway track maintenance have also changed with each passing day with the rapid development of my country's railways. From the very beginning From pure manual maintenance to small machinery to large machinery, it can also be said that the history of China's railway road maintenance methods is a microcosm of the history of my country's railway development. Jining Hengwang Industrial and Mining Machinery Co., Ltd. is also constantly updating its products and improving its services under the trend of railway science and technology development. If you have any questions, you can call: at any time, Xiao Zhang will answer you!
※Product introduction:
Model internal combustion rail grinder product, high quality, affordable price
Model internal combustion rail grinder is suitable for 3 rail welds, uneven joints, rail side fat edges, rail Polishing of surface welding repair and other parts. It has the advantages of high operating efficiency, good grinding quality, easy operation, and convenient access to and from the road. It is an essential tool for railway engineering overhaul, repair and emergency repair.
< r::\~\~\~\\\3
Working principle: The .type internal combustion rail grinding machine uses the machine as power, drives the synchronous pulley through the centrifugal clutch, and passes through the synchronous belt handle The power is transmitted to the main shaft to drive the grinding wheel to rotate. At the same time, a feed handwheel is used to adjust the feed amount of the grinding wheel. If it is necessary to grind the rail side and arc, the rail can be polished by rotating the profiling handwheel.
Operation method:
According to the above prepared work, when turning the feed hand wheel 3 clockwise, the grinding wheel will move down.
To obtain good polishing quality, two steps must be followed.
) Rough grinding: Grinding should start from the rail surface. The grinder moves back and forth along the rail, slowly lowers the grinding wheel and grinds the raised parts. After grinding to the off-rail surface, rotate the profiling handwheel to grind the side according to the above method.
b) Fine grinding: Based on the rough grinding, the grinder is repositioned to prepare for grinding the rail surface. When the grinder is in place, lower the grinding wheel so that it just touches the rail surface that does not need to be polished near the weld. Start grinding from the rail surface, and then rotate the profiling handwheel to grind the sides. The grinding range should reach both sides of the weld. To compensate for grinding wheel wear, the grinding wheel feed should be adjusted at any time.
After the grinding is completed, the handwheel must be rotated counterclockwise to lift the grinding wheel to facilitate grinding of the next weld, reduce the throttle, turn off the switch, turn off the machine, and stop the operation.
Before going down the road, reset the copy frame and the frame vertically to ensure transportation safety.
Precautions for internal combustion rail grinder
Before use, you must fill the oil according to the machine instructions
Do not use a grinding wheel with a speed lower than r/
Before replacing the grinding wheel, you must Stop the machine
Never use a damaged grinding wheel
After replacing the grinding wheel, run it idling for 3 seconds. During the test run, other personnel must stay away from the site
※Company introduction:
Jining Heng Wang Industrial and Mining Machinery Co., Ltd. is located in the charming city of Jining, the hometown of Confucius and Mencius and the capital of canals. It borders the Oriental Holy City Qufu to the east, the historic Beijing-Hangzhou Grand Canal to the west, Qilu Lingxiu Weishan Lake to the south, and Mount Tai, the most famous of the five mountains, to the north. The company was established in 2001 with a registered capital of RMB 10,000 and currently has more than 100 employees. It specializes in operating rock drills, rock drills, shotcrete machines, support equipment, scraper accessories, rail equipment and other mining equipment and accessories according to market needs. The company adheres to the business philosophy of providing convenient services to customers, creating development opportunities for employees, and the entrepreneurial spirit of being enterprising and enjoying success. We warmly welcome new and old friends from all walks of life at home and abroad to negotiate trade, create great causes and create brilliance together.
※Contact information:
Mobile:
Telephone:
Fax:
Manager: Zhang Shuang WeChat:
:
Email: @
Website::3
※After-sales service and delivery instructions
, Cost-effectiveness instructions:
Under the same product quality conditions, our company will not provide any information at the expense of reducing performance or changing product parts. The lowest and most realistic price. (Product production configuration can be carried out according to customer requirements)
Delivery instructions:
Delivery is based on the supply period. If there are special circumstances that require early delivery, our company will do so within a limited scope. We will organize personnel to increase productivity, implement production, installation, debugging, packaging and other processes, and strive to meet your company's requirements
Product delivery comes with instructions:
①Product manual and maintenance manual
②Product Certificate of conformity
③Instructions attached to purchased parts
④Wearing parts and their list (the source may vary depending on the model)
. After-sales service scope:
The product warranty period is one year. If the product has quality problems during the warranty period, our company will provide the fastest maintenance without any cost. If parts need to be replaced outside the warranty period, our company will only charge the cost
Track the product:
Our company will After the product is sold, there will be at least one technical return visit every month to track and record the use of the product so that any problems can be dealt with in a timely manner and strive to achieve customer satisfaction.