Production of NRD-4 internal combustion flexible shaft tamping machine Internal combustion high frequency flexible shaft tamping machine

Production

Internal combustion flexible shaft tamping machine
Internal combustion high frequency flexible shaft tamping machine
China's railways have a history of more than a hundred years. For more than a hundred years, railway road maintenance With the rapid development of my country's railways, maintenance methods are also changing with each passing day. From the initial purely manual maintenance to small machinery to large machinery, it can also be said that the history of China's railway maintenance methods is a microcosm of the history of my country's railway development. Jining Hengwang Industrial and Mining Machinery Co., Ltd. is also constantly updating its products and improving its services under the trend of railway science and technology development. If you have any questions, you can call: at any time, Xiao Zhang will answer you!
※Product introduction:
-type internal combustion flexible shaft tamping machine, suitable for ballast tamping operations in the maintenance of any rail-type railway lines. Its characteristics are that the whole machine is light in weight and easy to operate. It has good tamping quality, low failure rate, easy maintenance, fast track speed, and strong applicability. It can not only tamp lines, but also track switches. It has high performance-price ratio and is very suitable for the needs of railway ballast tamping operations.
2. Main technical parameters
, Internal combustion engine model: or
, Power. Horsepower
Speed:
, Number of vibrations: times/min
, Amplitude:
, Host quality: ㎏
3. Basic structure and working principle
Working principle: The type internal combustion flexible shaft tamping machine is powered by Honda internal combustion engine and drives the tamping picks separately through the V-belt. The main shaft allows the power to be transmitted to the vibrating body, so that the tamping operation can be realized.
The basic structure is as follows: internal combustion engine, pulley cover, 3 pulleys, tamping spindle, vibrating body, chassis, tensioning device
4. Use and maintenance
Read the Honda internal combustion engine manual in detail.
. Add appropriate amount of engine oil to Honda internal combustion engine according to the instructions.
Before starting the machine, check whether the main shaft of the vibrating body and the vibrating body are well connected. If the vibrating body is separated from the main body, insert the head of the vibrating body on the main shaft of the vibrating body, lift the positioning pin, align it with the main shaft, insert it, and put it down. Positioning pin, rotate the vibrating body jacket so that the positioning pin can be inserted into the vibrating body jacket.
Before starting the machine, remove the vibrating body from the chassis, place it in a safe place, and start the machine according to the machine manual.
Increase the throttle, check whether the vibrating body vibrates, and start tamping under normal circumstances.
Before stopping, first reduce the throttle, then turn off the switch, and place the vibrating body on the respective sockets of the chassis.
. Check whether all parts are loose and whether the screws are tightened.
During storage, be sure to close the fuel valve to prevent leakage and danger.
During transportation, the engine oil and engine oil must be drained to prevent danger.
Please pay attention to moisture and humidity during storage.
5. Maintenance and inspection
Maintenance
Carry out after daily shift work, the specific contents are as follows:
) Wipe away dust and oil.
) Tighten all fasteners
3) Maintain the machine according to the machine manual.
, Maintenance
After 3 hours of use, the tamping machine needs to be fully inspected. The specific content is:
) Disassemble the main shaft of the vibrating body and check whether the bearing is intact
) Open the belt cover and check whether the belt is intact.
3) Check whether the belt tension is normal.
Service life of the flexible shaft vibrator
Under the correct use method, the length of the tamping line of the flexible shaft vibrator is less than.
※
Company introduction:
Jining Hengwang Industrial and Mining Machinery Co., Ltd. is located in the charming city of Jining, the hometown of Confucius and Mencius and the capital of canals. It borders the Oriental Holy City Qufu to the east and the historic Beijing and Hangzhou to the west. The Grand Canal borders Qilu Lingxiu Weishan Lake to the south and Mount Tai, the most famous of the five mountains, to the north. The company was established in 2001 with a registered capital of RMB 10,000 and currently has more than 100 employees. It specializes in operating rock drills, rock drills, shotcrete machines, support equipment, scraper accessories, rail equipment and other mining equipment and accessories according to market needs. The company adheres to the business philosophy of providing convenient services to customers, creating development opportunities for employees, and the entrepreneurial spirit of being enterprising and enjoying success. We warmly welcome new and old friends from all walks of life at home and abroad to negotiate trade, create great causes and create brilliance together.
※
Contact information:
Mobile:
Telephone:
Fax:
Manager: Zhang Shuang WeChat:
:
Email :@
Website: :3
※
After-sales service and delivery instructions
, Cost-effectiveness instructions:
Under the same product quality conditions, our company will not reduce performance or change At the expense of product parts, the lowest and most realistic price is given. (Product production configuration can be carried out according to customer requirements)
Delivery instructions:
Delivery is based on the supply period. If there are special circumstances that require early delivery, our company will do so within a limited scope. We will organize personnel to increase productivity, implement production, installation, debugging, packaging and other processes, and strive to meet your company's requirements
Product delivery comes with instructions:
①Product manual and maintenance manual
②Product Certificate of conformity
③Instructions attached to purchased parts
④Wearing parts and their list (the source may vary depending on the model)
. After-sales service scope:
The product warranty period is one year. If the product has quality problems during the warranty period, our company will provide the fastest maintenance without any cost. If parts need to be replaced outside the warranty period, our company will only charge the cost
Track the product:
Our company will After the product is sold, there will be at least one technical return visit every month to track and record the use of the product so that any problems can be dealt with in a timely manner and strive to achieve customer satisfaction.