Safe operation of hand chain hoists for lifting objects Ruibei e-commerce investment hotline 96559

The main products of Ruibei Hand Chain Hoist Purchasing Network include: brand hand chain hoists, imported hand chain hoists, domestic high-quality hand chain hoists, ordinary national standard hand chain hoists, full-bearing hand chain hoists, explosion-proof hand chain hoists, and stainless steel hand chain hoists. Hoists, low headroom hand chain hoists, special hand chain hoists for stage hoisting, aluminum alloy hand chain hoists, mini light and small hand chain hoists, combined integrated hand chain hoists, hand chain hoist accessories, lever hoists, and other products as well as hand chain hoists Other products related to gourds.
, hand chain hoist. ． When lifting objects, the binding position of the rigging must be reasonable, and the connection of the rigging must be firm. When binding objects, the edges and corners of the objects and lifting beams must be padded with wooden boards or other measures should be taken to prevent the edges of the rigging or the lifting parts from slipping.
Before lifting, the staff should be optimistic about their escape route to prevent the hook head and rope sleeve from breaking and rebounding to injure individuals, and to prevent the hanging object from falling and injuring people if the rooting point is not firm. The surrounding personnel who are not involved in the lifting should evacuate to a safe position where the rebound of the falling hook head of the workpiece cannot be affected.
When lifting the hand chain hoist, you must first test the lifting, that is, slowly pull the zipper to stress the rigging and objects, check the stress of the lifting points and rigging objects, and only lift if there are no problems. When the object is off the ground, further observe whether there are any abnormal changes in the lifting points, rigging and objects. If there are no abnormalities, continue lifting. When lifting, the object should find its center of gravity according to the requirements of the installation location. When the center of gravity is not correct, the object must be put down, and the object must be adjusted and tied securely before trial lifting or hoisting. It is strictly prohibited to manually balance the lifted object.
During the lifting process, the staff should hold the zipper with their hands to prevent the hand chain hoist from slipping and causing the object to suddenly fall. When operating, keep the lower half of the body as far away from the workpiece as possible to prevent the workpiece from falling and injuring people.
When lifting at multiple points, the operators must cooperate well and have a dedicated person to provide unified command to ensure that the workpiece is lifted smoothly. Personnel are strictly prohibited from lifting together with the object.
During the lifting process, workers are strictly prohibited from passing or staying in the lifting area. No one is allowed to extend any part of the body such as hands, feet, etc. into places that may be squeezed. Operators are strictly prohibited from working under the lifted objects.
. Lifting staff should stand on the ground. When working at an altitude of more than 1 meter, the staff should fasten their safety belts and stand on a stable scaffolding.
When the hand chain hoist is rooted on the hydraulic jack or bracket, it is strictly prohibited to use telescopic jacks or lifting brackets instead of pulling the hoist to lift the object.