80wled explosion proof floodlight wholesale

Where can you buy explosion-proof lamps on the market? What is the price of explosion-proof lamps? Where are explosion-proof lamps used? Explosion-proof lamps are used in dangerous places where flammable gases and dust exist. They can prevent possible explosions inside the lamp. Arcs, sparks and high temperatures ignite flammable gases and dust in the surrounding environment, thereby achieving explosion-proof requirements for lamps. There are mainly explosion-proof explosion-proof lamps, safety explosion-proof lamps, mobile explosion-proof lamps, etc. Explosion-proof lamps have good electromagnetic compatibility and will not cause interference to the surrounding environment. Exquisite structural design and good heat dissipation performance effectively reduce the temperature of the lamp body and extend the service life of the lamp. It is light in weight, small in size, compact and beautiful, and simple and convenient to operate.
Before installing explosion-proof lamps, check the nameplate and product manual: explosion-proof type, category, level, protection level of the group shell, installation method, and fastener requirements for installation, etc.
The installation of explosion-proof lamps must ensure firm fixation, the fastening bolts must not be replaced at will, and the spring washers should be complete. The dustproof and waterproof sealing rings should be placed as they are during installation.
At the cable entry point, the cable and the sealing gasket should fit closely. The cross-section of the cable should be round, and the surface of the sheath should not have defects such as bumps and convexities. The excess cable inlet must be blocked according to the explosion-proof type, and the compression nut must be tightened to seal the cable inlet.
Explosion-proof lamps and lampshades should be able to automatically cut off the power supply before opening. However, because the interlocking device is complex and difficult to implement, most lamps only have warning signs with the words "Strictly prohibited from opening while powered" on obvious parts of the casing. And because the surface temperature of the bulb is still very high after the power is turned off, if the lamp cover is opened immediately, there is still the risk of igniting the explosive gas mixture (mainly referring to the explosion-proof structure), so incandescent lamps, high-pressure mercury lamps, and high-pressure sodium lamps are light sources with high surface temperatures. , please pay attention to this point for lamps that can quickly open the cover.
When replacing the bulb (tube), the explosion-proof joint surface of the explosion-proof lamp should be properly protected and should not be damaged. The cleaned explosion-proof surface should be coated with phosphating paste or anti-rust oil. It is strictly prohibited to apply other explosion-proof paints. There should be no rust layer on the surface. If there is slight rust, there should be no pitting after cleaning. The sealing rings used for dustproof and waterproofing must be kept intact, which is very important for increased safety lamps. If the sealing ring is seriously damaged, replace it with a sealing ring of the same specification and material. If necessary, replace the entire lamp. During maintenance, pay attention to whether the lampshade is intact. If it is broken, replace it immediately.
Product name: Wholesale explosion-proof floodlights
Brand Jiaran explosion-proof
Place of origin, Yueqing, Zhejiang
Product explosion-proof: level
Product light source:
Protection:
Performance, explosion-proof, flammable and gas-proof
Explosion-proof mark: b/,
Product installation: boom type, ceiling type, wall-mounted, embedded type
The above is some introduction to the installation of explosion-proof lamps , our factory sells various explosion-proof lamps all year round. The powerful manufacturer will provide you with better lamps while protecting the quality.