Zhongshan Loctite 98853 Metal Magic Stick Henkel Loctite Metal Repair Agent Repairs Hole Cracks

Zhongshan Loctite 3 metal magic stick Henkel Loctite metal repair agent repairs hole cracks, original and authentic Henkel 3 metal grinding rod wholesale. 3. Contact person, Julie!
Loctite Metal Magic Glue Stick is a steel rod for sealing leaks under pressure. Gram
Metal Magic Glue Stick is a rod-shaped epoxy glue filled with steel powder. It can be kneaded by hand and filled in gaps or holes to block leaks. , the applicable time is 3 minutes, and the initial solidification time is minutes. After curing it can be drilled, tapped and painted. It is suitable for emergency sealing repair of leaks in water tanks and pipelines, and can be used to plug leaks when the pressure of steel materials is lower than .3. It can flat-fill welds and repair small cracks in castings. Fill bolt holes that are too large. The product meets the standards.
It is a steel-reinforced repair agent that can fill and repair leaks, cracks, blisters, defects, fractures, damage, etc. that appear on containers, pipes and some parts made of steel, iron, aluminum and other metal materials. bonding. In addition, it can quickly produce and copy parts, models, templates, repair peeling threads, fix bolts after they are strong, seal and other various forms of installation and fixation, etc.
Mainly used to repair cast iron and stainless steel parts, repair casting defects, and fill cracks and holes. It is used to make nuts and screws and repair worn threads. It is used for the repair of metal equipment, tools, pipes, appliances and automobile bodies. It does not shrink after curing and will never rust. The color after curing is gray and has a metallic luster.
Before use, the floating rust, dust, oil stains and other floating objects around the area to be repaired must be cleaned up. Take out the colloid in the plastic tube, cut off the required amount, and knead the two different colors of the colloid core and outer skin into one color by hand (about ~ minutes) until uniform. Press it firmly into the repair and squeeze it into holes and cracks as much as possible. The mixed adhesive will react quickly. The colloid will begin to heat up and solidify slightly after 3 to 3 minutes, and it will be very hard after 1 minute. Its clay-like form before curing prevents it from dripping or flowing during use, making it very convenient to use. When used in cold areas in winter, the colloid and surface to be repaired should be appropriately heated to room temperature or slightly above.
Distribution and wholesale:
Mobile phone:
Contact person: Zhu Li