L25 single-wheel roller can lug LS30 double-wheel roller can lug is cost-effective

Single roller can ear Double roller can ear Roller can ear series Roller can ear Single roller can ear Double roller can ear
Our company is a manufacturer of roller can ear and has many years of rich production experience. The can lug skin is made of polyurethane, which is wear-resistant and durable. The rolling can lug models produced by our company include single-wheel can lug models such as 3, 3, etc., and double-wheel roller can lug models, including 3, 3,. Etc., our company can also customize roller can ears according to the size required by customers, such as different types of roller can ears. Our company also supplies roller can ear accessories, such as roller can ear wheels. Welcome inquiries from mining bases and dealers across the country!
. Roller can lugs are divided into single-wheel roller can lugs and double-wheel roller can lugs. Single-wheel roller can lugs are used on both sides, and double-wheel roller can lugs are used in the middle of the two single wheels.
The roller tank ears produced by our company are used to lift containers (skips, cages, counterweights) in vertical shafts to provide guidance and buffering. The roller can ear products produced by our company have high structural strength, good performance, long service life, high reliability, smooth operation, convenient adjustment and simple maintenance. The roller can lug spring is lubricated with oil, has good dynamic characteristics and stable elasticity. It is a green and environmentally friendly product vigorously promoted by the country. Roller can lugs are available in a variety of specifications to meet the various needs of customers.
The roller can ear models include, 3,3,., and the double wheel 3,3,., our company can customize the roller can ear.
Structural principle of roller tank ear
The roller tank ear is a combined steel tank channel guide device independently developed by our company. The roller tank ear is mainly composed of rollers, brackets, spring buffer devices, bases, etc. The spring buffer device consists of an adjusting sleeve, an adjusting screw, a nut, a disc spring shaft, a guide sleeve, a coupling cap, a set screw, a disc spring, a flat key, a cylinder barrel, etc.
The roller tank ear buffer device adopts a disc spring group. Its working principle is that the roller is released by the vehicle through the bracket, adjustment sleeve, adjustment screw, and disc spring shaft. The up and down movement of the disc spring shaft is released and the disc spring group is compressed. buffer.
The disc spring shaft moves up and down in the guide sleeve and the guide hole at the bottom of the cylinder barrel. There is a key milled on the lower end of the disc spring shaft. The disc spring shaft cannot rotate due to the flat key at the bottom of the cylinder barrel. The guide sleeve is screwed into the cylinder and presses the disc spring shaft so that the shoulder of the disc spring shaft presses the disc spring. For safety and reliability, the guide sleeve is locked with a cap, and drilled and tapped together with the cylinder barrel, and set screws are used. Fasten.
Due to the rubber layer of the roller being worn during operation, the roller is adjusted by adjusting the screw to tilt forward and approach the tank channel. One end of the adjusting screw has a left-hand thread and the other end has a right-hand thread. Screw in the adjusting sleeve and disc spring shaft respectively. When adjusting, loosen the nut under the adjusting screw and turn the adjusting screw counterclockwise. The screw is screwed out and the roller tilts forward to approach the tank channel. After adjustment, tighten the nut under the adjustment lever.
Jining Dongda Mechanical and Electrical Co., Ltd. is located in Jining City, Shandong Province, the hometown of Confucius and Mencius. It is surrounded by scenic spots such as San Kong Holy Land, Mount Tai, Weishan Lake, and Shuibo Liangshan. It is adjacent to the Beijing-Shanghai Railway in the east and the Beijing-Shanghai Railway in the west. Beijing-Hangzhou Canal, adjacent to Ridong Expressway in the north, has convenient transportation and extends in all directions. The company has a registered capital of 10,000 yuan, an area of square meters, and total assets of more than 100 million yuan. The company has strong technical force, currently has many employees, including many professional and technical personnel, and has more than 3 sets of main production equipment and testing and testing instruments. It has formed a comprehensive capacity of annual production and sales of mining products exceeding 100 million yuan.