Small fully automatic pill making machine, fully automatic pill machine, fully automatic speed control pill machine

The operation process of the fully automatic pill making machine is to evenly put the refined medicine lump into the feeding port of the screw propeller, and the feeding blade rotates internally.
The material is pressed into the rotating spiral groove. The medicinal strip extruded from the machine mouth is introduced into the guide wheel groove. The medicinal strip hangs down into the slitter and is continuously rolled by the double rubbing wheels.
The basic steps of making honey pills are as follows: refining honey→mixing medicine→making bars→making pills→packaging→storage.
The selection and refining of honey are the key to ensuring the quality of honey pills. The purpose of refining honey is to remove impurities, destroy enzymes, kill microorganisms, evaporate water, and enhance viscosity. The method is: small-scale production can be heated in a copper pot or pot with direct fire; large-scale production can be refined with slow fire using a steam jacketed kettle, a reduced-pressure evaporation and concentration pot can be used for refining, and finally impurities can be filtered out. There are three levels of honey refining: tender honey, refined honey, and old honey.
Tender honey: Suitable for pill making of drugs with large amounts of oil, mucus, sugar and animal tissue.
Zhongmi: Suitable for fiber, starch and some fats and sugars, and general pill making.
Laomi: Suitable for pill making of mineral drugs containing a large amount of fiber and poor viscosity.
Mix the refined honey and medicinal powder in proportion (the ratio of medicinal powder to refined honey is generally: or: There are also deficiencies:, depending on the nature of the medicine and the season. Generally, sugar-containing Chinese herbal medicines containing oils and fats use less honey. Medicines containing more cellulose and loose texture use more honey. Use less honey in summer and more honey in winter. Knead evenly and make dough-like pills. Combine medicine. When mixing, honey is generally added while it is hot (if it contains colloids, resins or volatile components, the honey needs to be slightly cooled before adding and mixing), and mix thoroughly to make it moisturized inside and outside, with the same color, moderate hardness and softness, and can be pinched at will. Just mold it.
Place the combined dough-like soft material for a certain period of time, so that the medicinal ingredients and honey ingredients are mixed and moistened, and a certain degree of viscosity is generated. Then you can use the fully automatic pill-making machine to make pills. The pills will be uniform in size. The granules are round and full, etc. (A small pill making machine can be used for small-scale production.) When making pills, in order to prevent the pills from sticking to your hands and utensils, an appropriate amount of lubricant can be used during operation. The lubricant can be glycerin or Sesame oil (peanut oil) and beeswax are heated and melted in a certain proportion. In summer, a little more beeswax can be added.
Packaging and storage: The prepared honey pills can be wrapped in wax paper, cellophane, plastic bags, and wax shells Store in a cool and dry place. (Note: Do not expose the prepared pills to the sun.)