Taiyuan 2ZBQ150/6 pneumatic grouting pump has high suction power and high cost performance

规格：

2200*800*1100

材质：

合金

重量：

400 510

B/Pneumatic grouting pump
Working principle of B pneumatic grouting pump: B-type pneumatic grouting pump, compressed air enters the cylinder through the ball valve, air source duo, and two-position five-way reversing valve. Push the cylinder piston to reciprocate. Because the cylinder tie rod is connected to the pulp cylinder tie rod, the cylinder piston reciprocates and also pushes the pulp cylinder piston to reciprocate to complete the pulp suction and discharge action. The dial mounted on the cylinder tie rod moves the stroke valve back and forth to control the reversing valve to change the direction of the cylinder's intake and exhaust, and continuously completes the reciprocating motion of the cylinder piston.
Model preparation instructions: Grouting pump: Pneumatic rated flow rate/: Rated working pressure
/. Type pneumatic grouting pump:
Maximum grout discharge flow rate/Working pressure:
Air intake Pressure. Air consumption/
Noise pressure level (B) Host quality
Overall dimensions**
/Type pneumatic grouting pump:
Displacement: -/ Working pressure: < br/> Number of reciprocations: - times/ Air supply pressure:
Air consumption: ./ Weight:
Overall dimensions: **
Type / pneumatic grouting pump:
Displacement :-/ Working pressure:
Number of reciprocations: - times/ Air supply pressure:
Air consumption: ./ Weight:
Dimensions: **
Model B/ /
Working pressure - -
Displacement -/ -/ -
Number of reciprocations - times/ - times/ - times
Air supply pressure.
Air consumption?/ ?/ ? /
Weight
Dimensions *3**3* *3*
B/Pneumatic grouting pump/Pneumatic grouting pump/Pneumatic grouting pump B/3 Pneumatic grouting pump
B./Pneumatic grouting pump/.Pneumatic grouting pump/-Grouting pump/.Pneumatic grouting pump/Pneumatic grouting pump/Pneumatic grouting pump/Pneumatic grouting pump/Pneumatic grouting pump B/Pneumatic grouting pump Grout pump
B/Pneumatic grouting pump/Pneumatic grouting pump B/Pneumatic grouting pump B/3 Pneumatic grouting pump
B/3 Pneumatic grouting pump/3 Pneumatic grouting pump
Advantages and Features of Type B Pneumatic Grouting Pump
When selecting this type of grouting pump for double-liquid grouting, the ratio of the double-liquid grout to be injected must be stated when ordering
The air supply pressure must not be lower than. 3. The air supply volume shall not be less than
The gel or solid body has good durability and impermeability and is less affected by environmental factors.
The gelling or solidification time of the slurry can be adjusted according to needs, and has a satisfactory strength.
Factory address: Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone:
Inquiry: