Year1
- 平整度：
- 一般
- 防滑性：
- 强
- 耐磨度：
- 强
.
Product features:
There is no obvious vibration when the vehicle is driving, which reduces the friction noise between the vehicle and the lane, and reduces the damage of the lane to the car and car tires
The surface roughness is uniform and undulating. Small, super damping performance
, the surface is made of high-hardness imported resin to make the driveway itself self-cleaning, strong pressure resistance, high surface hardness, good wear resistance
, good weather resistance Resistant, long outdoor service life
Short construction period, easy later use and maintenance
Good surface water resistance, strong corrosion resistance to oil, acid, alkali, salt, etc.
Seamless surface , the pattern is beautiful and colorful, the symbol is obvious, and it improves the environmental quality.
Scope of application
Suitable for the renovation and renovation of ramps and old ramps in enterprises and institutions, residential areas, large-traffic public parking lots, up and down ramps of underground and floor parking lots, airports, Station waiting, terminal building up and down ramps, large loading area ramps, road steep slopes and sections requiring anti-skid.
Ground requirements
Strength and compactness of the concrete floor
It is recommended that the strength of the concrete floor should be above the above, and the original slurry should be plastered to ensure the density of the ground.
Integration of the concrete floor
It is recommended that when pouring concrete on the ground, the thickness should be above 100% to ensure a smooth ground slope.
Slope of concrete floor
It is recommended that the slope of the ground should be less than 10 degrees, and there should be no local bowing phenomenon on the ground.
Age of concrete floor
After the concrete floor construction is completed and cured for several days, driveway construction can be carried out.
Construction plan
Concrete base surface treatment: polish and level, remove surface debris and cement chips, remove grease and dirt, repair defects, and remove floating dust. Flatness, (meters depend on feet).
Use the special adhesive for the driveway, add water in proportion, mix it with the special material for the driveway according to the prescribed amount, mix it evenly, and then construct the interface structural layer on the concrete base.
After summer and winter, add the special adhesive on the interface structural layer. Draw lines, paste textured paper, and then use the same method to prepare the special B material for the driveway. After stirring evenly, construct the carrier pressure layer on the concrete base.
Then prepare the special material for the driveway in the same way, using a special watering can. An anti-slip surface layer is constructed on the carrier pressure layer.
After the construction is completed, the masking paper is removed and the defective parts are repaired in a timely manner.
Use special adhesive for lanes diluted in proportion to fully spray the lane surface, seal and solidify, cover with colored cloth, block entrances and exits, and seal for maintenance. In summer, people can leave after one week in winter, in summer one week, and rickshaws can be used after half a month in winter, and in summer it can be put into use after three weeks and four weeks in winter.
After maintenance, clean, clean and inspect.
WhatsApp
