Jining iko bearing, Jining slew bearing 133.50.4500.002

Jining bearings, Jining slew bearings.. ! / , -, Bearing radial load
< / , -: - ! / , - The bearings that mainly bear radial load are radial bearings. Nominal contact angle for this type of bearing. Roller bearings of the same size can accept greater radial loads than ball bearings.
< / , -: - ! / , -Type and type cylindrical roller bearings can only accept radial loads, while other types of radial bearings can accept both radial loads and axial loads.
< / , -: - ! / , -, axial load of the bearing
< / , -: - ! / , -The bearing that mainly bears the axial load is usually a thrust bearing, and its nominal contact corner. Thrust bearings and thrust angular contact ball bearings may also bear axial force in one or two directions depending on their structure.
< / , -: - ! / , -Under radial load, an axial force will be generated in the bearing, which is generally borne by the second bearing.
< / , -: - ! / , -In a bearing configuration consisting of two single row angular contact ball bearings or two tapered roller bearings back-to-back or face-to-face, each bearing must bear the axial force from the other bearing force. When the two bearings are the same, the radial load acts on the center of the two bearings. If the bearing configuration is adjusted to zero clearance, the load distribution can be automatically achieved when half of the components bear the load. It should be remembered that rigidity is affected not only by the elasticity of the bearing, but also by the elasticity of the shaft and housing, the mounting fit of the bearing ring, and the elastic deformation of all other components in the stress field, including the bearing. These factors have a considerable impact on the elasticity of the entire shaft system.