2016 New Product Release: Cyclic Six-Degree Space Vibration Testing Machine

model body size:
2. The function of the vibration testing machine:
.Strength of the structure.Looseness of the bond.Wear of the protective material.Damage of parts.Poor contact of electronic components.Circuit Short circuit and intermittent instability. The standard value of each part deviates. Screen the defective parts in advance. Find the resonance relationship between parts, structure, packaging and transportation process.
3. Advantages of using a vibration testing machine:
. During design, damage points and prone to defects can be analyzed
. During quality control, differences and defects produced in each batch of products can be analyzed Point
3. During production, it can be completely vibrated and measured at the same time, so that the defective rate of products can be detected early.
.Durability measurement allows products to last longer and non-durable components to be improved early, and the company's brand reputation will be better.
4. Technical parameters of vibration testing machine:
. Fully automatic six-dimensional space all-in-one vibration table (front, back, up, down, left, and right) (working on the same table)
. Can operate three axes at the same time, any time Simultaneous action of two axes, continuous action of (two/three) axes, random action (bandwidth can be set), sine wave (half wave/full wave)
3. Vibration table size**: There is a thread on the table There is a hook hole about the length of each hole and the center of the four sides
. Table body size**: Fully automatic six-dimensional space all-in-one vibration table (up, down, left, right and front) (working on the same table)
. Vibration function (Type): ① Vertical ② Horizontal ③ Random vibration (bandwidth can be set) ④ Sine wave (half wave/full wave)
. Continuous action together or continuous action)
. Frequency modulation function (arbitrary adjustment ~) Any frequency within the frequency range cannot exceed one of the following items (acceleration and amplitude)
. Frequency sweep function (arbitrary adjustment~) (upper frequency/lower frequency/time range) can arbitrarily set the true standard back and forth Frequency sweep
. Programmable function/arbitrary adjustment ~ ~ Each segment can be set arbitrarily (frequency/time) and cycleable
. Frequency multiplier function/arbitrary adjustment ~ ~ The segments increase in multiples ① low to high Frequency ② high to low frequency ③ low to high and then to low frequency / cycleable
. Logarithmic function / arbitrary adjustment ~ ① Down to upper frequency ② Up to lower frequency ③ Down to upper and then to lower frequency 3 modes of logarithm /Cyclable
.Vibration waveform sine wave (half wave/full wave)
.Load/sine wave excitation force
.Acceleration can be adjusted at will~
.Amplitude (adjustable Range -) Adjust the amplitude arbitrarily~
. Time control can be set at any time (in seconds)
.Power supply voltage
.Current
.Vibrator power 3
. Cooling method: natural air cooling
.Acceleration~
.Applicable temperature, humidity range and noise
.Temperature-℃~+℃/humidity~/range/noise within decibels