- 规格:
- 5-30S
- 型号:
- ZDMS
- 工作压力:
- 0.6-1.0MPA
< .Function introduction
. With video assistance function, the remote manual positioning and confirmation of fire conditions can be achieved through the video management system.
Automatic/manual control can be carried out through the video management system or on-site manual control box:
Automatic state:
After the device completes the positioning, it will send out an alarm signal and link the solenoid valve, water pump and other supporting equipment to spray water. Fire extinguishing, automatically close the solenoid valve and water pump after the fire is extinguished. If recurrence occurs, repeat all actions.
Manual state:
After the device completes its positioning, an alarm signal is issued. At this time, the fire situation needs to be confirmed through the on-site manual control box or the camera in the device transmitted to the fire center, and the solenoid valve is manually opened. Water pumps and other ancillary equipment can spray water to extinguish fires. At the same time, the device can be adjusted horizontally/vertically and reset. The application of this technology makes it possible to avoid damage to valuable items on site by water spray while the fire can be controlled manually.
The on-site manual control box can manually control the horizontal/vertical rotation, valve opening, and pump starting of the fire extinguishing device. It is also equipped with an emergency stop button to cut off the power supply in an emergency.
The startup sensitivity is adjustable, and different sensitivity levels can be used in different places.
The product is equipped with power supply and communication lightning protection modules, which can effectively avoid damage to the product by lightning strikes.
. <>Technical parameters
<> Installation height
<> ~
<> Maximum protection radius
<> < br/> <> Maximum flow
<>
<> Rated working pressure
<>
<> Maximum working pressure
<>
<> Interface Diameter
<>
<> Operating voltage/power consumption
<> Monitoring:, Scan:
<> Communication method
<> R (with on-site manual control box Communication)
<> Fire response time
<>
<> Working environment temperature
<> ~℃
<> Horizontal rotation range
<> ~ 3
<> Vertical rotation range
<> Elevation angle 3, depression angle
<> Overall dimensions
<> *3*