Year1
- 强度：
- 235
- 售后：
- 现场指导
- 颜色：
- 原色
1. New shear wall formwork support material:
High-performance cold-rolled steel, thickness is millimeter to .mm, this kind The characteristics of the new material are: corrosion resistance, high elasticity, firmness and no deformation.
2. New shear wall formwork support composition:
The three systems of shear wall, suspended beam, and open column formwork support combination structure use unified accessories, consisting of horizontal beams, vertical beams, external angles, internal angles, It consists of top tie rod, door card, wall screws and other accessories.
[Vertical beam] It is made of cold-rolled steel plates with a thickness of 100 mm and then welded. It consists of a jacket, a joint, and a beam core. Its structure and performance are the same as the vertical beams of the open column formwork support composite structure. Standard The length..., the height can be unlimited.
[Transverse beam] The cross beam is composed of a jacket, a beam core, and a hinge. The jacket and beam core have rectangular holes for adjusting the size of the wall screws. The vertical beams and formwork are fastened with the wall screws to ensure that the concrete is The mold does not expand during pouring. There are standard lengths, .,.,.,.,.,., which can be combined into various lengths to meet various wall lengths.
[Inside angle] The outside angle is used to connect the exterior wall corners with the beams to ensure the angle of the shear wall during construction.
[Door Card] The door card consists of an inner outer sleeve. There are bayonet joints connected to the beams at both ends. There are holes for wall screws on both ends. The bayonet holes at both ends are stuck on the beams at the door. Through wire threading Fasten on the rod to ensure that the width of the shear wall transverse plate at the doorway meets the size requirements.
【Through-wall screws】Through-wall screws are composed of screw washers and nuts and are used to fasten beams and door cards.
3. Advantages of new shear wall formwork support:
Strong versatility: the product is completely free to expand, contract and overlap, easy to operate, suitable for safe operation by all personnel, saving labor, and suitable for international companies with a large number of labor exports As a construction unit, workers of different types of work exported to the outside world can all operate.
The main components are standardized and have strong applicability: the length of the vertical beams is made according to the standard module, and can be assembled arbitrarily according to the different sizes of the building, and can be turned around for multiple projects
The template preparation is fast and accurate High: The Tianjian Industrial formwork calculation software can be used to quickly and accurately calculate the quantity of materials required for the formwork support system, which reduces the workload of construction technicians and saves formwork materials
Low cost (high reuse rate): can Reusable 3 times, while traditional wood can only be reused 3 times.
High safety: This product has a complete steel structure, standard parts are fastened, the structure is tight, the connections are compact, and it is safer and more reliable.
Improve corporate image: beautiful, tidy and generous, the construction site is neat and orderly, easier to manage, which can greatly enhance the overall image of the project.
Simple and convenient construction: This formwork system is mostly composed of sockets and pins. It is simple and convenient to install and dismantle, and the construction speed is fast. Compared with the traditional formwork technology, it can improve the work efficiency
High flatness : The formwork system has high strength and stiffness, and good stability, which greatly improves the quality of concrete pouring and can achieve the effect of fair-faced concrete
Time saving: For example, the on-site operation of a thirty-square-meter formwork structure only requires 3- It can be done in minutes.
Labor saving: Improve construction efficiency and shorten the construction period. The traditional structure requires a labor cost of about 1 yuan per square meter, while the digital steel support can be completed with only 1 yuan of labor cost.
Material saving: material costs are reduced, no wood is needed, the purchase cost of wood and steel pipes, screws, iron wires, iron nails, the main and secondary back flutes (keel) of the formwork are made of thin-walled steel, replacing the traditional formwork The square wood in the process increases the service life of the material and saves wood resources.
Strong anti-corrosion ability: The use of advanced anti-corrosion technology greatly improves the overall corrosion resistance, long service life and high recycling rate. An important factor in the failure of metal materials is corrosion, especially the steel materials used in building formwork systems. The on-site use environment is poor and they are prone to failure due to corrosion. Our company has adopted the world's most advanced anti-corrosion treatment technology for automobile steel plates - water-based electrophoresis materials. Degreasing, pickling, rust removal, phosphating, passivation, electrophoresis, and drying form a solid protective layer on the surface of the material, which greatly improves the anti-rust ability. After inspection, the salt spray test can last up to 1 hour. Therefore, the service life has been greatly improved compared with similar products.
WhatsApp
