Jinzhong 014.45.1800.001 slewing bearing supplier

Jinzhong... slewing bearing supplier / ' (3,3,3) - Nowadays slewing bearings are very popular, and many fields have begun to use them for work, but cleaning industrial equipment parts is also a relatively big task, China The Slewing Bearing Trading Network popularizes the cleaning technology of the slewing bearing of the bucket wheel stacker and reclaimer.
/ ' (3,3,3) -The slewing bearing of the bucket wheel stacker and reclaimer adopts manual lubrication, and hyperbolic gear oil is injected into the slewing bearing every shift. Because the viscosity of hyperbolic gear oil is low, oil is not easily stored in the slewing bearing, so dust can easily invade the slewing bearing. The dust deposited in the raceway cannot be cleaned, causing the oil injection pipe to be blocked and the rollers to become stuck in the raceway. To clean it, the entire machine must be disassembled, which costs about 10,000 yuan, and also delays work and affects production. The disassembly-free cleaning technology developed by the author not only saves money and manpower, but does not affect production.
/ ' (3,3,3) - Use temporarily added auxiliary equipment to inject high-pressure descaling fluid into the slewing bearing, and use the bucket wheel stacker and reclaimer to rotate repeatedly to cause relative movement between the friction pairs of the slewing bearing, and Clean the grease and dust deposited in the raceway. After cleaning, inject engine oil into the slewing bearing to clean up the descaling fluid. During cleaning, an annular groove is installed under the slewing bearing to recycle the waste oil used for cleaning to avoid environmental pollution. After cleaning, the added auxiliary equipment was removed, replaced with a manual dry oil pump, and the original lubrication system was restored. Use a manual dry oil pump to inject lithium-based grease into the slewing bearing for lubrication. It is recommended to clean it every working hour. The cost of each cleaning is about 10,000 yuan, which can save 10,000 yuan per year.
/ ' (3,3,3) - The above cleaning technology can save a lot of costs and bring better profits to the company. At the same time, the convenience of cleaning can also greatly improve labor efficiency, so this technology is currently It is extremely popular for cleaning slewing bearings.