Year1
- 材质：
- Q235碳钢
- 性能：
- 对油管或电缆起到牵引保护的作用
- 规格：
- 100*150
Commonly used specifications: drag chain
The most commonly used specifications are,,,,,,, and type. The width of the drag chain can be customized according to user requirements, and the bending radius ranges from - between. There are three types of support plates. When the drag chain needs to carry a large load of pipes and cables, a high-strength support plate monolithic type should be selected. When the pipe joint size of the pipe and cable is larger than the inner cavity diameter of the support plate or it needs to be frequently disassembled, assembled, repaired, etc. You can choose the support plate separated type to install the pipe and cable when there are many specifications and varieties, you can choose the support plate frame type*,*3 and series drag chains.
Selection principle: Inner height: Select the thickest one among the built-in cables, oil pipes, air pipes, water pipes, etc. as the reference height, plus at least the height space as the inner height of the drag chain. If there is overlap, the actual height after overlap will be used as the reference height.
Inner width: Select some thicker cables, oil pipes, air pipes, water pipes, etc., and the sum of their outer diameters is used as a reference for the inner width of the engineering plastic drag chain, and leave at least a minimum width space.
Bending radius: Select the largest bending radius among built-in cables, oil pipes, air pipes, water pipes, etc. as a reference value, and leave the above space.
Usage: Drag chain
Can be used in horizontal direction, vertical direction and combined horizontal and vertical direction movement. So what factors should be paid attention to when using horizontally? Generally speaking, if the movement of the steel drag chain in the horizontal direction exceeds the maximum load-bearing length of the drag chain, support wheels must be added to assist the operation of the drag chain. It can better ensure the service life of the drag chain. And we need to remind everyone that the bending radius of the drag chain running in the horizontal direction should be reasonably selected based on the actual conditions of the obstacles and the machine. When the steel drag chain is used horizontally or vertically beyond the predetermined range, guide grooves must be added to improve its stability and ensure that the drag chain can operate normally.
Note: The maximum stroke of the He-shaped steel drag chain is meters, and it is suitable for all transmission methods. Can be lengthened and shortened at will. In addition, changing the bending radius can be obtained by changing the pin axis. The bending radius should be selected according to the maximum diameter of the cable and should reach times of the cable diameter. For small strokes, a smaller radius can be selected accordingly
The width of the support plate of the steel-aluminum drag chain is to, and the width between the holes is The spacing amount is. The height of the chain plate, that is, the height of the support plate, is determined by the maximum diameter of the cable. When the machine tool is operating at its maximum, if the width of the steel drag chain exceeds, and the length of the drag chain exceeds For stability reasons, you should consider choosing a larger size drag chain.
Scope of application: Specializing in the production of special drag chains for steel plant unloading trolleys for cable and oil pipe protection. Direct sales from manufacturers Traction and protection. Drag chains have been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, door and window machinery, injection molding machines, manipulators, lifting and transportation equipment and other mobile equipment.
WhatsApp
