Thermal oil furnace cleaning agent manufacturer supplies

PH值：

9

稳定性：

不燃不爆

腐蚀性：

无

-Thermal oil furnace cleaning agent is specially used to clean heavy oil scale, oil coke, sludge in thermal oil heat exchange equipment and oxidized oil scale and carbon deposits formed in various thermal oil furnaces. - Thermal oil furnace cleaning agent is compounded from a variety of high-quality surfactants and organic additives. It has excellent permeability, emulsification and ability to remove oil coke. It has excellent solubility in water. It is simple, convenient and safe to use. Corrosion can be discharged directly after use. When using thermal oil furnace cleaning agent to clean thermal oil heat exchange equipment, it can significantly reduce cleaning costs, save cleaning costs, reduce environmental pollution, and have a short-term anti-rust effect on the cleaned pipelines. This product has passed the environmental protection test and meets the EU's r standards.
Product features:
Quickly remove grease and carbon deposits on internal pipes and heat exchangers of thermal oil furnaces.
The neutral, non-toxic and non-corrosive process does no harm to the internal pipes of the thermal oil furnace and the metal heat transfer surface of the heat exchanger.
It dissolves oil dirt and oil coke quickly and completely without leaving any residue.
, simple and convenient to use, no need for professionals to operate, just follow the instructions for use.
When the concentrated product is mixed with water and used to clean the thermal oil furnace, the cleaning cost is greatly reduced.
, a completely environmentally friendly product that is odorless, non-toxic, non-flammable, non-corrosive to the object being cleaned, has little irritation, does not damage the skin and can be discharged directly after cleaning.
Usage:
Drain the old oil. Use the heating system to heat the heat transfer oil to -℃ and discharge all the heat transfer oil in the system while it is hot. According to the conditions, the residual oil in the system can be released as much as possible. If it cannot be released, add cleaning agent to thin the oil through penetration, stripping and dissolution, and then discharge it. outside the boiler.
Add the cleaning agent and water to the high-level tank and turn on the circulation pump to circulate the heating furnace to heat the cleaning agent to ℃. The entire cleaning time is no less than an hour.
, Water washing: Fill the system with clean water and turn on the circulation pump for recycling. Use the heating furnace to raise the water temperature to ℃℃ so that all parts of the system can be circulated separately. After rinsing the system for an hour, open all low-level blowdown valves on the boiler to drain the water from the system. Rinse once.
Add new oil: Inject new heat transfer oil into the system.
Dehydration: The dehydration method is the same as the dehydration standard before the new system is used.
. Normal operation: The system is put into normal operation.
Packaging and storage: kg, kg plastic drums