Tangshan Mitsubishi touch screen glass screen GT1175 touch panel

-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/touch glass screen
-D touch panel/touch glass screen
-D touch panel/touch glass screen
-D touch panel/touch glass screen
-D touch panel/touch glass screen
-D touch panel/touch Glass screen
--Touch panel/touch glass screen
--Touch panel/touch glass screen
-D touch panel/touch glass screen
-Touch panel/ Touch glass screen.
Series
, lighter and more convenient to use. Inch type
, high brightness backlight color
, resolution × standard memory
, built-in standard interface
, protection level. [], Mitsubishi touch screen film surface is the touch surface, which is the front of the product, and the glass surface is the non-touch surface, which is the back of the product.
The Mitsubishi touch screen part is made of glass and the glass corners are sharp. Please wear gloves/finger cots when assembling.
When assembling the Mitsubishi touch screen, which is made of fragile glass, do not apply strong impact to the touch screen.
Avoid taking the lead wire directly. Pick up the touch screen and avoid pulling on the lead wire.
. The lead wire reinforcing plate part cannot be bent.
. Any part of the lead wire is not allowed to be folded in half.
The lead wire must be inserted horizontally during assembly and cannot be folded and inserted at the root of the reinforcing plate.
When picking up and placing products, it is necessary to handle them in a single piece and handle them gently to avoid products from colliding with each other and scratching the surface of the product.
When cleaning the surface of the product, please wipe it with a soft cloth (deerskin) dipped in petroleum ether.
Do not use corrosive organic solvents to wipe the surface of the touch screen film. Such as industrial alcohol, etc.
Do not stack touch screen trays.
Please pay attention to the following matters when designing the assembly and frame:
) The pillars that fix the frame of the Mitsubishi touch screen must be outside the visible area of the touch screen
) The edge of the frame must be within the operating area of the Mitsubishi touch screen. There should be no pressure action outside the frame from the viewing area to the operating area
) It is recommended that the material used to fix the Mitsubishi touch screen be plastic and the front part of the touch screen should be padded with soft material
) Do not use corrosive glue Stick on the surface of the touch screen.