Factory direct sales of fully automatic laminating machine cabinet door laminating machine, Johnson Machinery is a hot seller nationwide

Cabinet door blister machine
- --- -->
- --- -->, the processing size can be customized flexibly and diversified according to the requirements of different customers.
- --- -->
- --- -->, simple operation and centralized functions to save labor.
- --- -->
- --- -->. The oven is insulated with first-grade glass wool and adopts an automatic constant temperature system, which greatly saves electricity.
- --- -->
- --- -->, Heating uses infrared heating tube to heat evenly and quickly.
- --- -->
- --- -->. The equipment structure is reasonably designed and the dual-station operating platform takes advantage of the gap time between board layout and heating without wasting manpower, saving time and money. electricity.
- --- -->
- --- -->. It adopts imported vacuum pump and cooperates with large air storage tank to have strong suction and good effect.
- --- -->
- --- -->. The sealing system is equipped with high-temperature resistant silicone strips for good sealing effect and no air leakage.
- --- --> Paint-free doors are a relatively popular product in modern times. They do not produce formaldehyde and other harmful substances and are not harmful to the human body. Loved by many people.
--- --->Using oil-cylinder press technology with low failure rate. The heating method adopts electric heating control system.
--- --->Digital sensors are used for control, temperature and pressure signal acquisition. The system achieves high control accuracy through
--- ---> unified control.
--- --->Its main use is for single-sided pasting
--- --->, thermal transfer printing, and solid wood veneer on medium density board workpieces of various shapes. This equipment has high working efficiency, simple operation and a wide range of processed products. It is an indispensable decorative equipment for furniture factories and door factories.
-- -- -->Paint-free equipment processing process
--- --->Put the workpieces sprayed with glue into the workbench, and the distance between the workpieces is approximately
--- --->~
--- --->If the workpiece needs to be edged, use a backing plate to prop up the workpiece. The backing plate is smaller than the length and width of the workpiece
--- ---> (i.e. each side is smaller
--- --->) The thickness of the backing board is
--- --->
--- --->paved
- -- --->The film is put down and the pressure frame is clamped with a clamp
--- --->Press the automatic start button and the workbench will automatically enter the car. After the workbench is in place, it will start heating. When the heating time is up, it will start vacuuming. When the time is up, the workbench will automatically move out
--- --->Use a paper cutter to cut the workpiece after it has cooled slightly
--- ---> Take out the workpiece and complete the work in one go.