Yaming Machinery Manufacturing Co., Ltd. Factory direct sales of good quality CNC machine tool guide rail protective cover

导轨防护罩：

定做

风琴式防护罩：

定做

铠甲式防护罩：

定做

Steel plate protective cover manufacturer_Stainless steel plate protective cover manufacturer Steel telescopic guide rail protective cover is the traditional form of protection for machine tools. In this field, steel telescopic guide rail guards are widely used. They play an effective protective role in preventing chips and other sharp objects from entering. Certain structural measures and appropriate scrapers can also effectively reduce the coolant. Penetrate. Our factory's steel telescopic guide rail protective cover can adapt to the increasing requirements of modern machine tools for high technology, correct installation position, high operating speed, etc.
The steel plate protective cover is well sealed and can prevent iron filings, coolant and tool accidents.
.Sturdy and durable, smooth operation, low noise and beautiful appearance.
.Steel plate protective cover is suitable for high-speed machine tool guide rail protection, which is stable and has no vibration and noise.
The steel plate protective cover device not only protects the service life of the protective plate, but more importantly, ensures the precision of the machine tool.
. Each section of the steel plate protective cover opens in parallel and retracts in parallel at the same time to operate freely.
.The steel plate protective cover will not cause the guard plate to detach and make impact sounds, which is both beautiful and improves the service life of the guard plate.
.On the basis of the original sealing strip, a stainless steel cover plate is added to prevent high-temperature burns of iron filings to prevent the strip from rubbing into the rail surface and straining the guide rail.
Advantages of the steel plate protective cover device:
Each piece of the protective cover can move continuously and simultaneously, which is completely different from the general pull-type protective cover one by one, so the noise is extremely low.
Using a protective cover can extend the service life.
The steel plate protective cover device can increase the moving speed of the protective cover to/and withstand higher values.
The steel plate protective cover device makes the protective covers move simultaneously and parallel (avoiding the shortcomings of snaking of general shear-type protective covers).
, can be more stable and without vibration at high speed.
Technical data of steel plate protective cover:
The steel telescopic guide rail protective cover is made of high quality - cold-formed thick steel plate and can also be made of stainless steel upon request. Special surface polish will increase its value additionally. We can provide corresponding guide rail protection types (horizontal, vertical, inclined, transverse) for all types of machine tools.
According to the different running speeds and guide rails, the structures of the protective covers we develop are also different. Operating speeds/below we are equipped with polyurethane or brass slides. At medium/lower speeds we have rollers. In addition, a buffer system is required between the drive plate, scraper plate and chip suction plate. The purpose of the slide buffer system is to reduce collision, noise and friction.
The number of sections of the steel telescopic guide rail guard is important for its proportion, weight and operating characteristics. Each single section should be as long as possible to reduce the number of sections and reduce costs. In general, the ratio of large stretching to small compression should be between and:.
<=_