Shanxi large power plant oxidation fan desulfurization oxidation fan East China fan supplier

Shanxi large power plant oxidation fan, desulfurization oxidation fan, East China fan supplier
Introduction to oxidation fan
Generally, the fans used in power plants are oxidation fans for desulfurization, denitrification and other substances. Huadong Fan specializes in producing this type of oxidation fans.
The oxidation fan models of East China fan manufacturers include,,,, and other models.
The selection of oxidation fan should generally refer to the flow rate, pressure and other parameters of your fan according to your working conditions. If you have any questions about selection, please call us. Manager Zhang.
Characteristics of oxidation fans
In power plant flue gas desulfurization, oxidation fans have the following characteristics:
The working pressure of the desulfurization fan is higher. Generally, the temperature is higher when the fan is working. In terms of fan cooling, oil tank heating is used to cool down the fan. The water jacket allows the fan to keep the oil tanks on both sides of the fan working at low temperatures when working under high pressure, and allows the bearing gears to be fully lubricated and cooled to ensure long-term stability of the fan.
. The lubrication method adopts splash oil lubrication to avoid repeated work of regularly filling grease. Just observe the oil indicator on a regular basis.
. Use piston ring sealing in the fan sealing method to prevent gas from leaking and also prevent gas from flowing into the fuel tank to avoid oil flooding in the fuel tank.
. The surface of the impeller is coated to prevent corrosion of the impeller by gas under long-term operation. The service life is more than 10,000 hours.
. The seals of each lubricating part are processed by grinders without oil seepage or oil leakage.
. Preserved holes are installed in various parts of the fan to protect the bearings, temperature rise oil tank, temperature rise air temperature, pressure, inlet silencer resistance, and pipeline temperature during operation.
The bearing adopts double row roller bearing to ensure the service life of the bearing (more than 10,000 hours)
The check valve adopts fluorine rubber metal hard seal structure. The butterfly check valve has a high temperature resistant and corrosion resistant seal. Features.
. The elastic joints are made of fluororubber material to ensure normal operation under high temperatures.