Special type for micro motor detector to determine direction

Micromotor detector: Introduction to the special type for judging steering
Models ---, ---, --- Functional features:
,
This machine is equipped with a forward and reverse probe that can be installed on the tooling When the motor is placed on the tooling, if the direction is reversed, the alarm will start. It is mainly used to accurately determine the adverse phenomena of motor rotation caused by reverse colors of lead wires, reverse installation of positive and negative pole marks on the back cover of the motor, reverse polarity of internal magnets and other process reasons to ensure that every motor that leaves the factory is qualified. Suitable for iron core motors.
, model ---, ---, --- Functional features:
,
Without load (the motor shaft is not connected to the load, that is, the optical shaft), accurately determine the cause of the motor lead The reverse colors of wires, the reverse polarity markings on the back cover of the motor, the reverse polarity of the internal magnets, and other process reasons may cause the motor to rotate incorrectly. Ensure that every motor that leaves the factory is qualified for steering.
,
The detection is fast and the detection time can be as short as
It is especially suitable for rapid detection of motor quality in production lines, engineering departments, incoming material inspection, etc. It is suitable for complete inspection of products.
,
Accurate:
%
Identifies steering errors.
,
Practical and simple to use: This machine first uses a good quality motor to measure the parameters, and then it can detect the steering direction of motors of the same specification in batches.
,
A detector simultaneously detects parameters such as steering, rotational speed, current, and insulation resistance.
Exclusively provide products with this function.
Other functions: detect the speed of the motor itself or the speed after passing through the reduction box (both can be selected with the button).
Special fixtures are required. Suitable for iron core motors (coreless motors need to provide sample testing to confirm)