Special granulator for MIM nozzle material

Special granulator for nozzle material
Scrap recycling granulator for injection molding raw materials Metal powder scrap granulator Granulator for nozzle material
Changfeng Machinery participated in the Shanghai International Powder Metallurgy Carbide and Advanced Ceramics Industry Exhibition equipment: opening and closing internal mixer (drawer type internal mixer)
, flip-type internal mixer with double-wrist granulator (mixing and granulating splitter)
, dedicated for nozzle materials Granulator
, feeding batch mixing granulator.
The special granulator for Shuikou materials developed by Changfeng Machinery was exhibited at the Shanghai Everbright Exhibition and put on sale.
Nowadays, many companies’ processing of nozzle materials/leftover materials is nothing more than crushing. However, crushing in this way will contaminate the material and the output is also a problem.
Now the nozzle material granulator developed by Changfeng Machinery has perfectly solved the existing problems.
Changfeng Shuikou Material Granulator is designed for the recycling and granulation of nozzle materials for metal powder injection molding.
Model and corresponding output of nozzle granulator:
Model
Output

Kilograms per hour

Kilograms per hour
Granulation process:
Put the nozzle material directly into the hopper. The special rotating head in the hopper will chop the material and then directly transfer the material through the screw. The screw needs to be heated according to the characteristics of the material. After several stages of heating and cooling, cut into pellets.
Advantages of the special granulator for Shuikou materials:
High output, labor saving
No noise, no dust
The proportion of the formula is not easy to lose
Good fluidity for re-injection
The recycling rate is increased several times
No pollution to materials
The injection screw has a long service life
The contact information is as follows:
Mr. Chen-

During the injection process, the feeding material is affected by high pressure, high speed and the shape of the mold, which will result in residual stress and segregation of the binder and powder. If it is directly crushed and used, the defects caused by the previous mold will be carried into the next injection. For high-quality products The special granulation of nozzle materials that may have an impact can release the stress of the feed, mix the binder and powder more evenly, and improve the quality of the product.