Erren specializes in the production of manual stainless steel tire breaker 700 yuan/set of zinc-aluminum alloy tire breaker

Erren specializes in the production of manual stainless steel tire breaker
Yuan/set zinc-aluminum alloy tire breaker
Manual tire breaker stainless steel manual tire breaker manual tire breaker
Convenient tire breaker
Manual car stopper, car stopper, tire breaker price
Roadblock tire breaker
Quality of tire breaker, tire breaker reusable
Lightweight tire breaker, car stopper, manual car stopper
Manual tire blower puncture needle
Product parameters
, number of puncture needles: pieces
, interception length:
, road width used:
, width ( When unfolded):
, effective length of lancet:
, support material: made of aluminum alloy metal base thickness
, lancet material: zinc alloy triangular needle
, lancet length:
, Needle distance:
, Net weight per box: .(packed)
, Approximate dimensions: length, width and height.
, Effective interception time:
Product features:< br/> This roadblock traffic stop is composed of an aluminum alloy strip movable support and a hard die-cast zinc triangle. The aluminum alloy strips are connected by steel rivets to form a movable bracket that can be opened at will during use and can be simply closed after the work is completed. There is a central ventilation hole, and there are abandonment grooves on each edge and are connected to the central hole. After being nailed into the tire, the air in the tire will be quickly released directly from the central vent hole.
Company name: Shanghai Erren Industrial Co., Ltd.
Contact: Xu Yan
Phone/
Work:
WeChat:
Address: Songjiang District, Shanghai No. Shenglong Road, Jiuting Town
How to install the steel nails of the manual tire breaker
Use pliers to remove the damaged needle and fixed sleeve.
Use the small rotating pressure plate to take out the binding device placed in the box.
Remove the rubber sleeve on the front end of the steel nail, align the tip of the steel nail with the small hole of the binding device, and insert the steel nail.
. Put the small hole of the big end of the fixed sleeve on the tail of the steel nail.
Use a needle installer to align the installed steel nails and fixing sleeves with the fixing holes of the plastic support and gently press them in until they are in place.
Pull out the needle installer and put a rubber sleeve on the tip of the steel nail.