Bengbu rubber pellet machine is the best choice for your business h9 Heying Machinery

When using the rubber pellet machine, you must follow the operating rules to avoid incorrect operations that may cause equipment failure. Let's take a look at what you need to pay attention to before starting up the rubber pellet machine and during production:
Check whether there are foreign objects in the drum (it must be empty before starting up) and turn on the power.
, start the motor and run it for 1 minute, then slowly feed the material from the lower hopper. Feeding should not be too fast or too much.
If the material is stuck and the motor does not rotate, please turn it off immediately to avoid burning the motor. Continue to use it after removing the stuck material.
. It is strictly forbidden to touch the pellet machine drum with hands or tools during use of this machine.
Please replace different screens according to your needs.
. Regularly inspect the machine parts. Check the worm gear, worm, bearing and other moving parts once a month for flexibility and wear. If any defects are found, they should be repaired in time and should not be used free of charge.
The machine should be placed in a dry and clean room where the atmosphere must not contain acids or other corrosive gases flowing around the machine parts.
After the machine is used once or when it is shut down, the rotating drum should be taken out for cleaning and the remaining powder in the bucket should be brushed away and then installed properly to prepare for the next use.
If the machine is not used for a long time, the whole machine must be wiped clean. The smooth surface of the machine parts should be coated with anti-rust oil and covered with a cloth.
Gongyi Heying Machinery Manufacturing Co., Ltd.
Manager Zhou:
Landline:
Toll-free: -
Company:
Factory address: Gongyi, Zhengzhou, Henan Province City Construction Road Number (if you drive by car, you can navigate to Heying Company)