Oriental scenery Shangtuo light pipe lighting system | no electricity lighting | factory lighting | garage lighting

管径：

530mm

Light guide lighting is another name for Suntuo light guide lighting system. It directly utilizes solar energy and transmits light to places that need light through this system, such as underground garages, aquariums, plant lighting, etc. The light guide lighting system consists of: lighting cover, rainproof device, standard tube, elbow tube, extension tube, fixed ring, decorative ring, diffuser, etc. It is mainly composed of three parts: lighting cover, light pipe and diffuser. Its working principle is to capture outdoor daylight through outdoor lighting devices and introduce it into the system. Then it is strengthened and efficiently transmitted by the light guide device, and then the diffuser guides the natural light evenly into any place in the room that needs light. From dawn to dusk and even on cloudy or rainy days, the lighting system introduces sufficient light into the room. Simply put, it is a device that directly uses natural light to provide daytime lighting for the interiors of various types of buildings. It can be widely used in new construction, reconstruction and expansion projects. It is currently the most advanced architectural lighting method that is very energy-saving and environmentally friendly. Principle
The outdoor natural light is introduced into the system through the lighting cover for redistribution. After being transmitted and strengthened by a specially made light pipe, the diffusion device at the bottom of the system irradiates the natural light evenly and efficiently to any place in the room that needs light. Places receive special lighting effects brought by natural light.
Structure
In terms of lighting methods, there are two types of light pipes: active and passive. The active type collects sunlight through a concentrator that can track the sun. This type of light pipe has a good effect in collecting sunlight, but the cost of the concentrator is quite expensive, which limits its application in the construction industry. The most commonly used one at present is the passive daylighting light pipe, the condenser cover and the light pipe itself are connected together and the fixed condenser cover is mostly made of plexiglass or plexiglass injection molding, with a triangular total reflection condensing prism on the surface. This type of light pipe mainly consists of a condenser cover, a rainproof plate, an adjustable light pipe, an extended light pipe, a sealing ring, a support ring and a diffuser plate.