Chifeng coal briquetting machine leaves a deep impression on customers h1 Huayi Machinery

The coal briquette machine is also called the pulverized coal briquette machine. It can be used to press pulverized coal and iron powder. The molding process of the coal briquette machine is divided into cold pressing and hot pressing. Cold pressing is the main one. Molding is divided into binder molding and binder-free molding, with binder molding being the main one. According to my country's national conditions, pulverized coal molding mostly uses binder addition, medium and low pressure, drying-free, and cold pressing molding processes.
The coal briquetting machine can be used to press coal powder, iron powder, coking coal, aluminum powder, iron filings, iron oxide scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke Various powders, powders, waste materials, waste residues, etc. are widely used in refractory materials, power plants, metallurgy, chemicals, energy, transportation, heating and other industries. The materials formed by the briquetting machine are energy-saving and environmentally friendly, easy to transport, and improve It improves the utilization rate of waste materials and has good economic and social benefits.
The structure of the coal briquette press consists of three parts: a feeding part, a transmission part, and a forming part
. The feeding part is mainly used to achieve quantitative feeding to ensure that the material enters evenly between the pairs of rollers.
, Transmission part, the main transmission system is an electric motor triangle belt reducer open gear roller.
The forming part mainly refers to the main machine part, and the core part is the roller.
The coal briquetting machine must have a relatively balanced base. Pay attention to correcting the level and smoothing the gaps. The conveyor must also correspond to the height and level of the conveyor. After installation, strictly check whether each component is Make sure the connection is firm, check whether there are any debris on the machine, add enough lubricating oil to the reducer and gear box, and test the machine only after confirming that all components are correct. When testing the machine, check whether it is reversed. After the direction is correct, run it idling for 30 minutes to see if there are any abnormal noises or heat in each component. If any problems are found, solve them promptly. When everything is normal, prepare kilograms of dry materials (pulverized coal without added moisture, fine sand or refractory materials). Perform dry grinding and polishing for about five times before formal production. Please note that the moisture content has a great influence on the balling pressure and demoulding. It must be mastered. It is best to dry first and then wet. It is strictly forbidden to repeat the process. Start.
Henan Huayi Machinery Manufacturing Co., Ltd.
Telephone
Mobile
Fax
Email@
Address Wen County Industrial Cluster, Jiaozuo City, Henan Province