CW62125 lathe professional manufacturer 2125 heavy duty lathe price

In the servo system of the lathe professional heavy-duty lathe manufacturer, the direction of the hydraulic cylinder movement of the lathe professional heavy-duty lathe manufacturer depends on the direction of the input signal, and the speed of the movement depends on the size of the input signal. The advantages of the jet tube servo system are: simple structure, low component processing accuracy requirements, large area at the jet tube outlet, strong anti-pollution ability, professional lathe manufacturer, heavy-duty lathe that can work under harsh working conditions, no unbalanced radial force on the jet tube No jamming will occur. Its disadvantages are: the inertia of the moving part of the jet tube is large, the working performance is poor, the jet energy loss is large, the reactive power loss at the zero position is also large, the efficiency is low, it is easy to cause vibration when the oil supply pressure is high, and there is a large axis along the axial direction of the jet tube. Xiang Li. Therefore, this kind of servo system is only suitable for low-voltage and low-power situations, such as the servo systems of some hydraulic profiling machine tools. The working principle of the nozzle-baffle hydraulic servo system is composed of a nozzle, a baffle, a tube sheet and a hydraulic cylinder. There is a fixed orifice and an intermediate oil chamber in the nozzle. Part of the pressure oil from the hydraulic pump directly enters the rod chamber of the hydraulic cylinder, and the other part enters the intermediate oil chamber through the fixed orifice to reduce the pressure and then flows into the hydraulic cylinder. No rod cavity. Guide rail parameters:
<= d%> %> Specification and model
%> >
%> >
%> Maximum rotation diameter on the bed
%> >
%> >
%> Professional manufacturer of lathes Maximum rotation diameter on heavy lathe tool holder
%> >
%> >
%> Maximum workpiece length
%> >
%> >
%> Rotation diameter/effective width in saddle groove
%> >
%> >/
%> Spindle through hole diameter and Shaft head type
%> >
%> >(Series) (Series)
%> Spindle through hole front end taper and tip taper
%> >
% > >(Series) (Series) Mohs No.
%> Professional manufacturer of lathes, heavy lathe spindle speed series and range
%> >r /
%> >Types
%> Longitudinal feed level and range
%> >/
%> >Types
%> Range:
%> >/
%> >< br/> %> Range:
%> >/
%> >
%> Micro feed range using exchange gear
%> >/
%> >
%> Ratio of transverse feed amount and longitudinal feed amount
%> >
%> >/
%> Saddle rapid movement speed
%> > /
%> >
%> Machine tool screw pitch
%> >
%> >(metric)/(imperial)