Year1
- 处理风量：
- 20480m3/h
- 过滤风速：
- 1.0m/min
- 过滤面积：
- 180㎡
dust collector and smoke removal equipment produced by our company
is mainly supplied to Inner Mongolia, Northeast and other North China regions. The product quality is reliable. The steel plates used in the dust collector manufacturing are all national standards and the thickness reaches the standard. The whole process is made and welded firmly. We can provide it in the early stage. Door-to-door measurement service allows you to design dust removal equipment more accurately. If there are quality problems with the equipment later, our company can also send technicians to repair it (no fees will be charged for the whole process). If you need to know more about dust collector design, please call our company for service. Hotline: (Manager Li)
The shape of the cyclone dust collector is a horn-shaped curved body with a cone and a sloping bottom. It is a new type of dust removal equipment with a novel and elegant appearance and efficient dust removal. There are very high requirements on the dust particles in the smoke, the concentration of dust at the entrance, and the entrance speed. Made of metal or ceramic materials with high temperature resistance and corrosion resistance, it can be used normally at temperatures up to 10 degrees Celsius.
The dust removal principle of the cyclone dust collector: according to its inflow mode, it can be divided into two types: tangential entry type and axial entry type. The dust-containing gas entering the dust collector is made to rotate at a high speed and the dust particles are separated from the air flow by centrifugal force and captured on the wall of the dust collector. Finally, the dust particles are collected in the ash hopper by gravity. The dust removal equipment consists of a cylinder, a cone, an inlet and an exhaust pipe and other parts.
The type cyclone dust collector is a horn-shaped vertebral sloping bottom type dust collector. The dust concentration at the entrance should be less than g/s. The entrance speed should not be less than m/s. The dust particles should not be larger than millimeters. It is suitable for industrial exhaust gas treatment in general industrial ventilation and dust removal systems. Heavy material recycling such as metallurgy, electric power, mechanical processing, petrochemical industry, building materials and other departments can be used in occasions with large wear or corrosiveness after adding appropriate internal weighing, but sticky dust cannot be used.
WhatsApp
