TD-15 Sand Fixing Liquid Xi'an Swenger Factory Direct Sales Price Low Quality Guarantee

Model
Components
Single component
Physical form
Material is white emulsion
Ingredients
Nano-scale, small molecular weight synthetic resin
Features
d Low viscosity can be sprayed
d Water-based emulsion can be used on wet base layers
d Natural color curing does not change the original base color
d High adhesion force has a curing and hardening effect on the base Obvious
d Strong penetration, depending on the base material, the penetration depth can reach ~ varying
d This product is non-toxic, odorless and does not contain formaldehyde, benzene and other volatile substances
Material
Purpose
d Penetration reinforcement:
Repair of concrete defects such as sanding, powdering, looseness, and slag loss
d Painting protection:
Ancient city wall , Anti-corrosion coating protection for masonry buildings
d Anti-seepage and anti-mildew:
Moisture-proof protection for waterfront buildings, gypsum boards, etc.
Materials
Uses
d Concrete Surface painting enhances wear resistance
d Concrete surface painting increases brightness and improves decorativeness
d Mixes with cement and sand to be used as anti-wear repair material
Performance parameters
Implementation standards: Reference/-"Organic silicone waterproofing agent for building surfaces"
Huaqian Sand Fixing Liquid Material
Huaqian Sand Fixing Liquid Material
Value
Minimum Film Forming Temperature
Value
Minimum film forming temperature

℃
℃
d Construction temperature: It can be constructed at ambient temperatures above ℃.
dReference dosage: .-.kg/square meter. Substrates with different densities vary greatly
Long-term storage will cause precipitation and stratification. Stir well before use.
d During construction, use brushes, roller brushes, and spraying equipment to directly apply or spray this product on the surface of the base layer to be treated until the base layer no longer absorbs it.
Sand repair
The first step is penetration and sand fixation:
Directly spray and apply the Huaqian sand fixing liquid material and fully infiltrate the base layer. After the base layer is completely absorbed, apply wet-on-wet Brush a second time to ensure that the sand-fixing fluid fully and fully penetrates the base layer. For general sandy and loose concrete floors, if the spraying is serious, the number of spraying passes should be increased appropriately.
The second step is to repair defects:
According to the weight ratio of Huaqian sand solidification liquid materials: Ordinary Portland cement: Fine sand =::, mix and stir into a uniform mortar and scrape it with a spatula Just compact, smooth, polish, maintain and dry the defective area.
The third step is brightening and wear-resistant treatment:
For concrete floors with wear-resistant requirements, Huaqian sand-fixing liquid can be used to spray the sandy and loose concrete floor. After a few days, the ground can be sprayed Apply the Huaqian solid sand liquid material once and do not need maintenance. It can be used normally within 1 day after application.
Packaging and Storage
Kg/barrel. Store in ℃ environment to avoid exposure to sunlight and freezing. The shelf life is months.
Application Examples
Guyaju, Jinshanling Great Wall, Luoyang Ancient City Wall, Xi'an Ancient City Wall,