Year1
- 容量：
- 15A
- ZLSD：
- 15A
- 输出电压：
- 220V
DC converter
/D
Series
Main features D high-frequency DC switching power supply/DC converter
. The DC converter high-frequency switching power supply module adopts advanced dual-tube forward switching technology. The modules adopt an isolation design to prevent mutual influence between modules.
.In the case of + backup, even if one or several modules fail, it will not affect the parallel operation of other modules and automatic current sharing can be achieved between modules.
.High-frequency switching power supply module
Meet the power supply needs of grid system and grid system. The wide input voltage range is suitable for areas with large grid voltage fluctuations.
The meter-type module uses a half-digit meter to display the output current and voltage, which is simple and practical.
.The module is easy to install in a standard chassis with a width of inches and a height of 2 inches.
.Wide operating temperature range. Full power output can be achieved within the temperature range of -°C to +°C.
.High frequency switching power supply module
Small size and light weight.
Technical Specifications
<= dd Technical Characteristics
Parameters
=> Communication
Flow
Input
Input
Input method
/> Single-phase three-wire system (//)
=> Input voltage
When powered by the grid:
Rated input voltage: Fluctuation range: ~
When powered by the grid:
Rated input voltage: Fluctuation range: ~
Input frequency
Rated input frequency: / Fluctuation range: ~
Input current
Input when the AC input voltage is: and Current
Inrush current
Under rated input conditions, the starting inrush current is not greater than % of the peak input current under rated operating conditions (peak current caused by capacitance is not considered)
=> Efficiency
Efficiency% when powered by grid system
Efficiency% when powered by grid system
Input power factor
Technical characteristics
Parameters
=> DC
Current< br/> Output
Output
=> Output power
(See the table for each nominal value)
When power supply is provided by the grid:
Maximum rated output power: Maximum output power :
When power supply is provided by the grid:
Maximum rated output power: Maximum output power:
Output voltage
(See the table for each nominal value)
Rated output voltage: See Table
The voltage polarity is determined by the connection method
Average float adjustable range (absolute value): see the table
Current limit value
See the table for each nominal value
Stable Voltage accuracy
Telephone scale noise
Broadband noise voltage
(.～) (.～)
Discrete frequency noise voltage
(.～) (～)
(~) (.~)
Peak-to-peak noise voltage
(bandwidth)
Current sharing capability between modules
(when connected in parallel)
Whichever of the maximum and minimum Below the phase difference (above % load)
=> Safety
Protection
Insulation strength
Input to output: D Input to chassis: D Output to chassis: D
Leakage current
Less than
Reliability
Mean time between failures
<= dd <= dd Technical characteristics
Parameters
=> DC
Current
Input
Input
Input method
DC positive and negative poles (positive/negative)
< br/> Input voltage
D
Input frequency
Rated input frequency: / Fluctuation range: ~
Wave Inrush current
The starting inrush current under rated input conditions is not greater than % of the peak value of the input current under rated operating conditions (peak current caused by capacitance is not considered)
Efficiency
Efficiency %
Input power factor
=> Direct
Flow
Input
Out
Output power
Output voltage
D
Rated output current
Current limit value
Voltage stabilization accuracy
Broadband noise voltage
(.～) (.～)
Discrete frequency noise voltage
(.~) (~)
(~) (.~)
Peak-peak noise voltage
/>
(Bandwidth)
Current sharing capability between modules
(When connected in parallel)
The difference between the maximum and minimum is less than (% load or more)< br/>
=> Safety
Protection
Insulation strength
Input to output: D Input to chassis: D Output to chassis: D
Leakage current
Less than
Reliability
Mean time between failures
Cooling Method
Forced air cooling (there is a DC fan inside the rectifier with an air flow rate of)
=> Working
Environment
Working temperature
/>
-℃～﹢℃
Storage temperature
-℃～﹢℃
Relative humidity
%~% (no condensation)
=> Mechanical
Parameters
Overall dimensions
Width, height and depth
Weight
.
D/
Series
WhatsApp
