Produced by Zhejiang manufacturer, BFC8120 infield strong light explosion-proof lamp

Ocean King Infield Strong Explosion-proof Light ()
()
1. Scope of Application
Our company provides fixed lighting for flammable and explosive places and related roads, indoor and outdoor operations and construction sites. The models that need to be developed can work safely in flammable and explosive places.
Ocean King infield strong light explosion-proof lamp ()
()
2. Performance characteristics
It adopts two-cavity explosion-proof and meets the latest requirements of explosion-proof lamps and can be used in flammable and explosive dangerous places. Work safely and reliably.
The lamp body is made of lightweight alloy material with high strength and corrosion resistance and good impact resistance. The transparent part is made of large arc and high temperature resistant special tempered glass to expand the heat dissipation space, reduce the temperature rise and extend the service life of the bulb
The surface of the lamp adopts the latest spraying technology and does not discolor or rust. It can be waterproof and rainy and can be used outdoors for a long time. It is small in size and light in weight. It can be installed in a variety of installations such as pendant type, wall-mounted type, ceiling type and light pole type. The operation is simple and convenient
Ocean King infield strong light explosion-proof lamp ()
()
3. Technical parameters
Rated voltage
Explosion-proof mark d
Power Factor greater than
Protection level
Anti-corrosion level
Insulation level
Inlet thread and cable size/,~
Overall dimensions Lamp holder ballast box: #
Weight Lamp holder:. Ballast box:.
()
Equipped with light source:
Order number Equipped with light source, rated power, luminous flux, average service life
-
-
-
-
-
Ocean King Infield Strong Explosion-proof Lamp ()
()
IV. How to use
Confirm the lamp Choose the appropriate installation method and the installation location of the ballast box and prepare a special three-core cable of corresponding length.
Use screws to install and fix the lamp and ballast box, then use an Allen wrench to unscrew the side cover screws, remove the side cover, and introduce one end of the prepared three-core cable into the wiring cavity through the explosion-proof connector. Connect the wiring to the corresponding position of the terminal base. Connect the yellow wire to the ground wire. After connecting, tighten the side cover screws and then tighten the explosion-proof connector and cable compression screws.
. Connect one end of the three-core power cable to the terminals marked on the binding posts in the ballast box through the introduction device of the input port of the ballast box.
. Connect one end of the cable connected to the power supply to the input terminal through the introduction device of the ballast input port. Then close the tail cover of the ballast box and tighten the screws. Connect the other end of the cable according to the explosion-proof requirements. Just turn on the power to light
Ocean King infield strong explosion-proof light ()
()
5. Precautions
The special ballast box provided by our company must be used .
When installing and maintaining lamps, the power supply must be cut off first.
. The center temperature of transparent parts is high and cannot be touched directly with hands.
When replacing a light bulb, use the same type of light bulb. If the bulb type or power is changed, the corresponding ballast should be replaced.
Ocean King Infield Strong Explosion-proof Light ()
()
6. Quality Assurance
The company has passed: International Quality System Audit Certification Strictly implements international quality management system standards production assurance The product quality fully meets the national standards and design requirements. The product is subject to an annual warranty (the light source is guaranteed for one year). If the product fails during normal use within the year from the date of purchase, the company will be responsible for free maintenance.