app modified asphalt waterproofing membrane

< --d ---Construction method
--d ---dd ! Hot melt or cold bonding.
< --d ---Compare with related products
--d ---dd ! Compared with modified asphalt waterproofing membrane, modified asphalt waterproofing membrane has better high temperature resistance and more Suitable for use in hot areas.
< --d ---Selection points
--d ---dd !, type polyester tire or glass fiber tire modified asphalt waterproofing membrane has higher heat resistance but lower low temperature flexibility Difference. It is suitable for roof waterproofing layer of general construction projects in non-cold areas. Waterproofing membranes whose upper surface material is made of polyethylene film or fine sand shall not be used exposed.
--d ---dd ! Type II polyester tire modified asphalt waterproofing membrane has the characteristics of large tensile strength, high elongation, good heat resistance and good low temperature flexibility. It is suitable for roof and underground waterproofing projects in general and colder or hotter areas with waterproof grades of Grade II and III.
--d ---dd ! Type II glass fiber tire modified asphalt waterproofing membrane has high tensile strength, good dimensional stability and heat resistance, but no elongation. It is suitable for general engineering roofing or underground waterproofing projects in general and colder areas with stable structure.
--d ---dd ! Glass fiber reinforced polyester felt rolls can be used for mechanically fixed single-layer waterproofing but must pass the wind load test.
--d ---dd ! When the rolled material is combined with the coating film, it should be compatible and should be placed above the coating film. When the rolled material is combined with the waterproof mortar, it should be placed under the waterproof mortar. ->