Jinzhou Shuangxing internal combustion tamping pick SND-23

Burning tamping pick manufacturer price picture
Zhou Shuangxing has been specialized in manufacturing for ten years
Department Zhang Gong
Inquiry phone numberbr/>Line
Creating an industry-leading product, Zhou Shuangxing
Price pictures of burning tamping pick manufacturers
Zhou Shuangxing Railway Machinery Co., Ltd. is located in the beautiful coastal city of Jinzhou, Liaoning. It is a company specializing in the production of rail drilling machines, rail sawing machines, tamping picks, rail grinders, and hydraulic squarers. Manufacturer of sleepers, rail gap adjusters, hydraulic track pullers, sleeper internal combustion bolt wrenches, hydraulic rail pullers, high-speed rail equipment and other road maintenance machinery and line fasteners.
The company has advanced production equipment and mechanical testing equipment, and has dozens of major machining equipment including vertical milling machining centers, CNC lathes, turning, milling, planing and other testing equipment.
Internal combustion tamping pick manufacturer price picture
Internal combustion tamping pick parameters
Product name Internal combustion tamping pick
Engine model
Engine form single cylinder, air-cooled, two-stroke
Maximum output power./
Fuel consumption
Impact frequency/min/
Impact energy
Clutch speed/
Idle speed/
.Working speed/
Fuel gasoline and engine oil mixing ratio ()
Fuel tank volume
Impact system grease ()℃ high temperature lithium-based grease
Dimensions
Fire tamping pick manufacturer Price pictures
Operation guide for fixing picks
, Preparation before use
Check or tighten the bolts and threaded connections of each part of the machine, and they should be firmly connected.
Mix gasoline and special lubricating oil for two-stroke Komatsu gasoline engines in a proportion of , and shake evenly.
Pour the mixed gasoline into the gasoline engine case and wipe off the remaining gasoline on the outer surface.
Inject oil (machine oil) into the eccentric block bearing. When filling oil, first remove the hexagon socket screw from the sleeve end cover, then use a needle tube to fill the oil hole with oil. After the oil filling is completed, tighten the screw. The initial injection amount is, and then every working hour, every oil injection.
It should be noted that the lubricating oil in the rod should not be excessive, and the oil level should be at a height that does not contact the lower end bearing of the eccentric block.
Ready to start after checking that everything is correct.
Note that the main engine selected for this machine is a two-stroke all-round working gasoline engine. Please use a mixture of gasoline and special lubricating oil for two-stroke Komatsu gasoline engines. Otherwise, the operation of the gasoline engine will be affected or the cylinder of the gasoline engine will be damaged.
Start the gasoline engine
Put the tamping pick upright on the gravel or soil ground. Do not stand it on the hard ground.
Press the gasoline engine pump more than once to pump oil, and close the throttle control handle to the minimum (idle speed). If the engine is cold started or started in winter, the damper should be closed.
Hold the handle of the tamping pick with one hand, pull the starting handle of the gasoline engine with the other hand, and tighten the pull rope. Pull the starter handle quickly. After the gasoline engine is started, the starting handle should be slowly returned and the air door should be opened.
After the gasoline engine is started, it should be run at idle speed for a few minutes to warm up the engine to lubricate all parts of the gasoline engine before it can work.
Tamping operation and shutdown
Hold the handle of the tamping pick, open the throttle of the gasoline engine to the maximum, and repeatedly insert it into the ballast of the track bed to perform the tamping operation.
The machine should be shut down during breaks. Do not idle for a long time.
When stopping, first close the throttle to the minimum, then press and hold the stop button to stop.
When the rest time is long or not in use, the tamping pick should be placed flat on the ground with the handle facing down to avoid dropping the gasoline engine.
Be careful not to leave the tamping pick upside down (pick head facing up) for a long time.
Price pictures of burning tamping pick manufacturers
Zhou Shuangxing after-sales service and delivery instructions
Cost-performance instructions
Under the condition of product quality, our company will not reduce performance or change product parts. Price, give the lowest and most realistic price. (Product production configuration can be carried out according to customer requirements)
Delivery Instructions
Delivery within the delivery date. If there are special circumstances that require early delivery, our company will organize personnel within a limited scope Increase production intensity, implement production, installation, debugging, packaging and other processes, and strive to meet your company's requirements
Product delivery comes with instructions
Product instructions and maintenance manuals
Product certificate
Instructions attached to purchased parts
Consumable parts and their list (the source may vary depending on the model)
After-sales service scope
The product warranty period is one year. During the warranty period, the product has quality problems. The company provides the fastest maintenance without any charge. If parts need to be replaced outside the warranty period, our company only charges the cost
Track the product
The company will have at least one customer service every month after the product is sold. We will conduct follow-up visits on technical usage, track and record the use of products, handle any problems in a timely manner, and strive to achieve customer satisfaction.
Zhou Shuangxing produces and sells the following products
Railway vehicle internal combustion tamping picks, tamping machines, hydraulic rail hole extruders, hydraulic rail drilling machines, manual rail drilling machines, rack-type track starters machine, hydraulic track starter, rail cutting machine, square sleeper, hydraulic rail straightener, rerailer, universal gauge ruler, rail grinder, square ruler, rail transport car, etc.
Track accessories baffles, switches, Turnout accessories, turnout tie rods, track gauges, track gauges, track gauges, track gauges, anchor rods, anchor drill rods, pneumatic drill rods, turnout pads, track splints, track spikes, insulating splints, crossover switches, Backing plate, composite rubber backing plate, track fastener rail clamp, gauge tie rod, guard rail buckle plate, line buckle plate base, insulated gauge rod, buckle plate, twist drill pipe, coal drill pipe, twist drill pipe, connecting sleeve , chain spreader, draft drill, anchor pallet, pallet, nylon baffle seat, manual switch, manual bender, bender, bending machine, rail pressure plate, fish plate, fish tail Bolts etc.
Zhou Shuangxing sales network in northern China, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Beijing, Tianjin, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Chongqing, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Ningxia, Xinjiang and other places.
Note that the above content is provided by Jinzhou Shuangxing Railway Machinery Co., Ltd. Related product parameters and pictures are for reference only. Specific products may have different origins due to different production batches. Please contact the sales staff for specific details.