Large parking space marking supplier, hot melt large parking space marking recommendation

.Hot-melt marking construction process, reflective hot-melt markings, using glass bead primer and petroleum resin hot-melt paint. 1. Place the paint in a hot melt machine and heat it. The melted temperature should be controlled between degrees Celsius and 10 degrees Fahrenheit, and the paint should be fully stirred for about a minute before coating. The road markings are subject to the sun, rain, wind, snow and ice, as well as the impact and wear of vehicles, so there are strict requirements on their performance. Firstly, it requires short drying time and simple operation to reduce traffic interference. Secondly, it requires strong reflective ability, bright colors and strong reflectivity to ensure good visibility during the day and night. Thirdly, it should have slip resistance and wear resistance to ensure Driving safety and service life.
Using special road-specific cold paint, sprayed manually, with uniform thickness and clear color. Including parking spaces, no-parking yellow lines, channel lines, diversion strips, guide arrows, etc.
Special marking putty for parking lot marking and road marking has strong adhesion, good stain resistance and weather resistance, and its average service life is higher than other marking paints.
Place the paint in a hot-melt machine and heat it. The melted temperature should be controlled between degrees Celsius and 10 degrees Fahrenheit, and the paint should be fully stirred for about a minute before coating.
Hot melt coating can be applied after the primer is dry. While painting the markings, sprinkle reflective glass beads to increase visibility at night.
1. Product Features Parking space marking paint is prepared by grinding thermoplastic acrylic resin, pigments, additives, solvents, etc. It has good adhesion, fast drying, wear resistance, and good water resistance.
2. Scope of application Parking space marking paint is suitable for marking lines on cement and asphalt roads and as a sign paint.
3. Technical requirements for parking space marking paint
, paint film appearance is smooth and semi-gloss
, flash point
, drying timetable, minutes drying, minutes drying
, theory The amount of paint used is about
4. Construction, storage and transportation of parking space marking paint
According to the construction conditions, use special diluent to adjust the viscosity.
The paint can be applied by brushing, rolling or spraying.
. The dust and dirt on the construction road should be cleaned, and then the paint should be applied. Construction workers should strengthen their own protection and wear safety protective equipment to prevent paint mist from being inhaled into the body and splashing on the skin.
The product should be placed in a dry and cool warehouse with a shelf life of three months.
During storage and transportation, collision, sunlight, rain, and fire sources should be strictly prohibited.