East Asia lamps (Ocean King BFC8120) infield strong light explosion-proof lamp

Ocean King Infield Strong Explosion-proof Light ()
()
1. Scope of Application
Our company provides fixed lighting for flammable and explosive places and related roads, indoor and outdoor operations and construction sites. According to the needs, the model of in-field strong light explosion-proof lamp developed can work safely in flammable and explosive places.
Ocean King infield strong light explosion-proof lamp ()
()
2. Performance characteristics
It adopts two-cavity explosion-proof, meets the latest explosion-proof lamp requirements, and can be used in flammable and explosive environments. Work safely and reliably in hazardous locations.
The lamp body is made of lightweight alloy material, which has high strength, strong corrosion resistance and good impact resistance. The transparent part is made of special tempered glass with large arc and high temperature resistance, which expands the heat dissipation space, reduces the temperature rise and improves the efficiency of the bulb. Lifespan
The surface of the lamp adopts the latest spraying technology, does not discolor, does not rust, is waterproof and rain-proof, and can also be used outdoors for a long time
Small in size and light in weight, it can be used as a boom or wall-mounted type , ceiling type and light pole type and other installation methods, simple and convenient to operate
Ocean King Infield Strong Light Explosion-proof Light ()
()
3. Technical Parameters
Rated Voltage
Explosion-proof mark/
Power factor is greater than
Protection level
Anti-corrosion level
Insulation level
Inlet thread and cable size/,~
Overall dimensions Lamp holder ballast box
Weight Lamp holder. Ballast box.
()
Equipped with light source
Order number Equipped with light source Rated power luminous flux Average service life





Ocean King infield strong light explosion-proof lamp ()
()
IV. How to use
, Confirm the installation position of the lamp and ballast box, choose the appropriate installation method, and prepare the special three-core cable of the corresponding length.
After installing and fixing the lamp and ballast box with screws, use an Allen wrench to unscrew the side cover screws, remove the side cover and pass one end of the prepared three-core cable through the explosion-proof connector and introduce it Connect the wiring in the wiring cavity to the corresponding position of the wiring base. After connecting the yellow wire to the ground wire, tighten the side cover screws, then tighten the explosion-proof connector and cable compression screws.
. Pass one end of the three-core power cable through the introduction device of the input port of the ballast box and connect it to the terminals marked on the binding posts in the ballast box.
. Connect one end of the cable connected to the power supply through the introduction device of the ballast input port to the input terminal. Then close the tail cover of the ballast box and tighten the screws. Connect the other end of the cable to the input terminal. Just turn on the power supply according to the explosion-proof requirements to light
Ocean King infield strong explosion-proof light ()
()
5. Precautions
You must use the special town hall equipped by our company flow box.
When installing and maintaining lamps, the power supply must be cut off first.
The center temperature of transparent parts is relatively high and cannot be touched directly by hand.
When replacing the bulb, the same type of bulb should be used. If the bulb model or power is changed, the corresponding ballast should be replaced.
Ocean King Infield Strong Explosion-proof Light ()
()
6. Quality Assurance
The company has passed the international quality system audit certification and strictly implements the international quality management system standard production. To ensure that product quality fully meets national standards and design requirements, the product is subject to an annual warranty (light source is guaranteed for one year). Within one year from the date of purchase, the company will be responsible for free maintenance of any malfunctions that occur during normal use of the product.