BQG150/0.2 pneumatic diaphragm pump for multiple industries - diaphragm pump price

Pneumatic diaphragm pump for multi-industry diaphragm pump price

. . . . . . . The sheet does not exist. 1. Overview
The diaphragm pump produced by our company adopts, absorbs and improves the international The most advanced production process and technology of pneumatic diaphragm pumps. This product is specially designed for coal mines. It has all the functions of traditional submersible electric pumps, mud pumps, impurity pumps and flexible shaft pumps. It is a revolution in traditional mining water pumps. The key is to completely solve the safety issues of traditional water pumps. The product can provide high conveying speeds at low air pressures and is compatible with a wide range of materials. This water pump has an anti-stall design and a modular pneumatic motor/fluid part.
Pneumatic diaphragm pumps are used to discharge clean water underground in coal mines, or sewage containing solid particle impurities (volume concentration less than %). They can also be used in non-coal mines and other occasions with similar transmission media.
4. Technical Parameters
Model
Rated
Flow
/
Discharge
Pressure
Rated
Wind pressure
Maximum
Air consumption
Passed particles
Maximum particle
Diameter
Length, width and height
Weight
Import and export
Pipe diameter
(inches)









< br/>























< br/>























< br/>


The electronic grade pneumatic double diaphragm pump is a complete plastic material pneumatic double diaphragm pump specially developed for the high-tech electronics industry and highly corrosive media. Its materials are: conductive type, conductive type. Pneumatic double diaphragm pumps are very suitable for use in high pollution, high hazard, strong acid, low noise and clean room working environments. In particular, it is most suitable for high-tech industries such as printed circuit boards, semiconductor industry, packaging industry, super corrosive transportation and optoelectronics industry.
Since the 1990s, with the rapid development of my country's chemical industry and domestic market, enterprises and manufacturers have become more demanding and strict on the transportation of corrosive media. The leakage of toxic and corrosive media greatly affects the safety of operators and pollutes the environment. Electronic grade pneumatic diaphragm pumps can effectively prevent and solve such problems.
This product has an obstacle chamber system and a diaphragm detector. When the diaphragm is damaged, a signal is generated and transmitted to the controller. The controller then issues instructions to shut down or alarm.
The barrier chamber system has two layers of diaphragms and two controllers. The space between the diaphragms is filled with ultrapure liquid. When the inner diaphragm in contact with the medium is damaged, the pumped medium and the ultrapure liquid change their conductivity after mixing. This change is transmitted by the sensor to the controller. When the outer diaphragm is damaged, the signal is also transmitted to another controller through the sensor. This can prevent diaphragm damage and media leakage from causing serious consequences.
The diaphragm detector installs the sensor in the muffler. When the diaphragm on either side is damaged, the medium flows into the muffler. At this time, the sensor can transmit the sensed signal to the controller for relevant control. .
Generally speaking, when transporting special or high-purity media, it is necessary to minimize the leakage of the medium and cause unnecessary pollution and waste. If necessary, the above two functions of the electronic grade pneumatic diaphragm pump can be used to ensure that the operator Safety, environment and media pollution, therefore this type of pneumatic diaphragm pump can be widely used in the transportation of special chemical media. Provide enterprises with a more convenient, safe and efficient solution. I firmly believe that in the next few years, the application fields of electronic-grade pneumatic diaphragm pumps in China will continue to expand. If you encounter this problem, this product provides customers with an excellent solution.
2. Main Features
The pneumatic diaphragm pump uses air flow to push the valve core to reciprocate, causing the pressure air to enter the left and right air chambers alternately, causing it to push the diaphragm to reciprocate and generate pressure in the working chamber. Poor, achieve the purpose of water absorption and drainage. It is small in size, light in weight, and does not require a foundation. It can be used as a mobile pump without lubrication. The main valve has no special requirements for the air source and can be started by self-priming.
3. Working Principle
The mining pneumatic diaphragm pump uses the pressure difference in the air chamber to alternately generate suction liquid pressure and positive liquid pressure in the liquid chamber. Controlling the valve switch can ensure the forward flow of the liquid. After ventilation, the pump starts running and works continuously to ensure that the required pressure remains constant. The pump will increase and maintain the delivery pipe pressure, and when the maximum delivery pipe pressure is reached (or the distribution valve is closed), it will stop working and when needed time, resume pumping.
For inquiries, please call
Sun Xiao