Year1
- 规格：
- 15.24
- 规格：
- 17.8
Anchors in Song Dynasty,
Anchors in Song Dynasty,
' .Anchor cables
.Anchor manufacturers
Anchors in Song Dynasty,
Songti mine anchors, mine
Songti anchor cables
. The anchors are used in conjunction with the anchor cables. Usually the specifications of the anchors depend on the specifications and models of the anchor cables.
'
'.宋体
宋体 anchor.
Song style represents the anchor (the first letter of the Chinese pinyin of the anchor)
Song style represents the specifications of the steel strand
Song style steel strand, (the strength of the steel strand generally used in our country It is
Song Ti level
Song Ti steel strand)
Song Ti refers to the number of steel strands to be worn
. .Consultation phone number
Song Ti mobile phone
. .Technical Consultation
Song Dynasty
Song Dynasty Contact Manager Sang
. .After-sales Service Telephone
%. After determining the specifications of the anchors, we need to pay attention to the installation problem
.Notes
'. When cutting prestressed steel bars, it is advisable to use a grinding wheel saw and arc cutting is not allowed
'. When braiding steel strands, they should be straightened out one by one and bundled into bundles. disorder. The extruded anchors or embossed anchors at the fixed end of the steel strand should be assembled with the pressure-bearing plate and spiral bars in advance
'. The machinery, equipment and instruments used to apply prestressing force should be regularly maintained and calibrated
br/>'.Before tensioning the prestressed tendons, a concrete strength test report should be provided. When the compressive strength of the concrete meets the design requirements and is not less than % of the design strength grade, prestress can be applied
'. Before tensioning the prestressed tendons, the pressure-bearing plate surface should be cleaned and the pressure-bearing plate should be inspected Quality of concrete behind the slab. If there are holes in the concrete there, they should be repaired with epoxy mortar before tensioning
'. When installing the anchor, the anchor plate should be aligned, the clamps should be tightened, and the position of the pieces should be uniform. However, when tightening the clamps, they should not Beat too hard to avoid breaking the clip
'. Our factory specializes in the production of mining support products,
Song Dynasty goods supply
,
Complete Song Dynasty models
,
Lots of large discounts in Song font
,
The quality of Song font is long-lasting
,
The service of Song font is unlimited
,
The Song font sincerely welcomes new and old friends to call us Consultation
,
Ordering Song Dynasty
WhatsApp
