..Large 0.0 charcoal machine price

In recent years, with the rapid development of the national economy, the continuous improvement of people's living standards, and the implementation of the national policy of converting farmland to forests, the amount of charcoal used has increased significantly, and the production of natural charcoal has been declining year by year. Relying on natural charcoal can no longer meet the domestic market demand. Therefore, using agricultural and forestry waste to produce mechanism charcoal can not only alleviate the contradiction between supply and demand in the charcoal market, but also have good market prospects and obvious economic benefits.

Characteristics of machine-made charcoal
. The characteristics of machine-made charcoal are long burning time (twice that of miscellaneous charcoal), strong firepower, smokeless, odorless, and no explosion during the burning process. , does not pollute the environment and other characteristics. Its fixed carbon content is more than %, and its calorific value is more than 100 calories.
.There is no shelf life, as long as there are raw materials, it can be produced all year round, and the product is in short supply
. Since a certain amount of smoke is emitted during the drying and carbonization process, it is not suitable for production in residential areas.
. Suitable for medium and small-scale production, so the profit will be higher. The entire investment can be recovered that year.
. Suitable for metallurgy, chemical industry, hot pot, and barbecue especially suitable for catering industry. It has become an indispensable best fuel in the barbecue industry. At present, machine-made biomass fuel rods have also been widely used as fuel for industrial boilers, with considerable profits.
.If there are better raw materials locally and the production reaches a certain scale, charcoal can also be made for export, which will have wider sales and higher profits.

Our country has a vast territory. According to statistics from experts from relevant departments, there are hundreds of millions of tons of crop straw and other residues every year, and their utilization rate is only %. Most of the rest is rotten as garbage, and forestry tree branches, sawdust, etc. also account for over 100 million tons. Billions of tons are discarded. Each set of equipment in this project can turn tons of waste into tons of new energy - artificial machine-made charcoal.

The cost of artificial machine-made charcoal per ton is generally around RMB 1,000, while the domestic price of artificial machine-made charcoal is RMB 1,000 per ton. Each set of equipment can produce about 1,000 tons of charcoal sticks every year. The net profit after deducting all miscellaneous expenses and taxes is 10,000 yuan, which is reliable. The entire investment can be recovered in less than half a year. If it can reach a certain scale, the export of charcoal abroad can cost up to US$1 per ton. Together with the income from the charcoal by-product wood tar, it will achieve higher economic benefits.
Preparing to build a machine-made charcoal factory requires little investment and quick results
Planning to build a man-made machine-made charcoal factory with an annual output of tons of equipment requires an investment of . Or rice husks and sawdust are used as raw materials, which requires less investment). After the equipment is connected to the power supply at the factory, it can be produced immediately, and the products can be sold a few days later to see benefits. The speed of results is unmatched by other projects. However, starting a business with less than 100,000 yuan is more suitable for the development of economically backward areas.
On other projects, without high-quality operators and high-level technical personnel, it is impossible to master the performance of the machine. However, the operating technology of the charcoal machine is simple and easy to learn. Technicians with basic mechanical and electrical knowledge can operate it after extensive training. The company provides comprehensive technical support.
Machine-made charcoal promotion
A medium-sized industrial silicon plant requires more than 10,000 tons of charcoal every year. A large amount of charcoal is needed to make activated carbon, silicon carbide, crystalline silicon, carbon disulfide, insulation materials, and smelting plants. , In recent years, charcoal has been in short supply, and exports are increasing. The quality of machine-made charcoal is better than that of natural charcoal, the carbon content is about %, and the calorific value is about /. South Korea, Japan, and many foreign businessmen prefer to use artificial machine-made charcoal.
Note
① Anyone who purchases the machine can see the on-site startup demonstration, allowing you to witness the whole process of producing charcoal with your own eyes to ensure that you are satisfied with your purchase
② Our factory has no one anywhere in the country Establish a sales point or agency point. When purchasing a machine, please contact our sales department directly to prevent counterfeiting
Contact person Tian Ying
Contact information
Toll-free hotline
Contact
Contact number
Company address: No. Oufu Road, Creative Valley Street, Yanjiao Development Zone, Beijing Jingdong
Bus route: Take the road or road at Beijing West Railway Station and get off at the Yong'anli intersection, transfer to the road or road and go to Bawang Get off at Fen, then take the road or get off at Zhao Fu, there will be a car to pick you up.
Take Lu or Lu Lu at Bawangfendong at Beijing Station, transfer to Lu or Lu Lu and get off at Zhong Zhaofu. There will be a shuttle bus to pick you up.